915 Generation Smart Remote Control for LG HD 4K Tv MR600 MR650 MR700 MR-19

How to setup - Registers the remote control: 1. Make you have installed 2 AA batteries correctly.
2. Connect the USB receiver to the USB port of the TV, place the remote control as to the USB interface as possible.
3. Press down the 'wheel (OK)' for more than 3 seconds, the remote control LED will .
4. the remote control at the USB receiver, the LED will blink 3 and then turn off, registration is complete, a pointer appears on the screen.
When registration is complete, KYES direction (Up / Down / Left / Right), scroll up, scroll down, wheel (OK), p. , the pointer uses RF, other still hold to use IR. With some of the TV models, if there is no response when connected to a USB port, try another USB port.
Pointer If you press the (Up / Down / Left / Right) while the pointer is in use, the pointer will from the screen. To show the pointer on the screen again, press the pointer key. You can move the remote control slightly to the right or left to control the direction.
Stop inserting the remote control.
Press and hold the BACK HOME and at the same time for about 5 seconds to disconnect the remote control from your TV. The LED will blink 3 and then turn off. The remote control will function as a universal IR remote control.
Learn the setting function?
There are 4 buttons that can be learned for your TV box remote control.
1. Press the key and the set key at the same time for 3 seconds. LED will flash, learn to mode.
2. Press a button on your original TV box remote control, the LED will stop flashing and keep lighting, then press one of the 4 removable buttons, not the button can work the same as the button on your original remote control.
3. To repeat the above steps to learn more buttons.
Colour: black
Material: plastic
Size: 18 x 5 x 3cm Package Contents:
1 x Smart Remote Control
Note: without AA battery Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.