يستخدم هذا الموقع ملفات تعريف الارتباط. لمزيد من المعلومات حول كيفية استخدامنا لملفات تعريف الارتباط ، يمكنك قراءة إشعار الخصوصية وملفات تعريف الارتباط الخاص بنا. ملفات تعريف الارتباط وسياسة الخصوصية
4 units left
عروض
التوصيل والارجاع
اختار العنوان
محطة الاستلام
توصيل للمنزل
سياسة الارجاع
يمكنك ارجاع اغلب المنتجات خلال 14-30 يوم من تاريخ الشراء، مع ضرورة الإبلاغ عن وجود اي عيب ظاهر في خلال 48 ساعة، للإستثناءات والشروط راجع سياسة الإرجاع من هنا.تفاصيل
الضمان
بيانات البائع
ABC Technology MPDS
60%تقييم البائع
2 المتابعين
أداء البائع
هذا البائع جديد على جوميا وليس لديه نقاط كافية لتقييم أدائه حتى الآن
مواصفات المنتج
2) في حالة وجود وحدة استخبارات واحدة فقط لسبب ما ، يجب وضع UPS في وضع تجاوز الصيانة للتشغيل قبل إزالة وحدة الاستخبارات الفردية هذه. يجب أن يتم ذلك عن طريق إغلاق تجاوز الصيانة بعلامة القاطع. اعتمادًا على جهاز Symmetra UPS الذي يتم صيانته ، سيختلف موقع القاطع هذا. إذا كانت هناك وحدتا ذكاء ، فليس من الضروري وضع UPS في وضع الالتفافية.* عند تعشيق قاطع تجاوز الصيانة في Symmetra LX ، يجب دفعه بقوة وبسرعة إلى اليمين لضمان عدم تعرض الحمل لأي انقطاع في الطاقة.
3) حدد موقع وحدة الاستخبارات الفاشلة وقم بإزالتها. إذا تم تثبيت وحدتي ذكاء ، فستتولى وحدة الاستخبارات المتبقية التحكم في UPS إذا لم يكن قد تم بالفعل. يمكن التعرف على وحدة الاستخبارات الفاشلة بواسطة مصباح LED أحمر صلب مضاء على صفيف LED الخاص بوحدة الذكاء. يمكن التعرف عليه أيضًا عبر شاشة عرض PowerView.
4) أدخل وحدة الذكاء البديلة واتركها عدة ثوانٍ للتشغيل.
المواصفات
المواصفات الرئيسية
- 1) On most Symmetra systems, the Powerview LCD display connects to one of the intelligence modules via a category 5 unshielded twisted pair patch cable. This cable should be disconnected from the intelligence module to which it connects in order to ease the process of installation. If the UPS is a Symmetra Power Array (Masterframe or Miniframe) this will not be necessary as the Powerview display does not directly connect to either intelligence module.
- 2) Remove the intelligence module that is not in control.
Symmetra LX will indicate which intelligence module is in control by illuminating an additional green LED on the far left of the LED array. Symmetra Power Array and Symmetra RM indicate which module is in control using the redundant intelligence module's orange LED (second LED from the left on the LED array). If this LED is illuminated, the redundant intelligence module is in control. If this LED is not illuminated, the main intelligence module is in control.
- 3) Insert the replacement intelligence module in the now empty bay. Allow this module several seconds to boot up and confirm that the module is operating properly by the LEDs illuminated on the intelligence module. The green LED to the far right of the module's LED array should be solid. If the red fault LED on the intelligence module illuminates and stays lit, there is a fault. Please contact APC support.
- 4) Remove the remaining intelligence module and insert the second replacement module. Allow this module to boot up and confirm that the module is booted by the LEDs present on the module. The green LED to the far right of the module's LED array should be solid. If the red fault LED on the intelligence module illuminates and stays lit, there is a fault. Please contact APC support.
- 5) Ensure that the main intelligence module has assumed control of the UPS.
]Symmetra LX will indicate which intelligence module is in control by illuminating an
محتويات العبوه
المواصفات
- SKU: AP150EA10ZRN7NAFAMZ
- الموديل: SYRIM3
- بلد الصنع: France, China
- الحجم (طولx عرضx ارتفاع سم): 16.8 x 42.33 x 4.8
- اللون: Silver
- الخامه الرئيسية: metal
آراء العملاء الموثقة
لم يتم تقييم المنتج بعد