يستخدم هذا الموقع ملفات تعريف الارتباط. لمزيد من المعلومات حول كيفية استخدامنا لملفات تعريف الارتباط ، يمكنك قراءة إشعار الخصوصية وملفات تعريف الارتباط الخاص بنا. ملفات تعريف الارتباط وسياسة الخصوصية
الصفحة الرئيسيةمستلزمات السيارات والموتوسيكلاتالعناية بالسيارةالتشطيباتدروع واقية4Pcs TPMS For For Mazda CX-30 3 (BP) B-Hatch Xev 2019-2024
جنيه 2,223.73
جنيه 4,203.1447%
1 units left
مصاريف الشحن تبدأ من جنيه 702.12 الي 6 اكتوبر
وفر ١٠ جنيه على مصاريف الشحن عند الدفع مسبقا
0 out of 5
(لا يتوفر تقييم)عروض
التوصيل والارجاع
تم شحنه من الخارج
اختار العنوان
محطة الاستلام
مصاريف الشحن جنيه 1,827.11
جاهز للاستلام يوم ٠٤ يونيو عند الطلب خلال19hrs 0mins
توصيل للمنزل
مصاريف الشحن جنيه 702.12
يتم التوصيل يوم ٠٤ يونيو عند الطلب خلال 19hrs 0mins
سياسة الارجاع
يمكنك ارجاع اغلب المنتجات خلال 14-30 يوم من تاريخ الشراء، مع ضرورة الإبلاغ عن وجود اي عيب ظاهر في خلال 48 ساعة، للإستثناءات والشروط راجع سياسة الإرجاع من هنا.تفاصيل
الضمان
None
بيانات البائع
JG-Encantador
94%تقييم البائع
145 المتابعين
أداء البائع
معدل سرعه توصيل الطلب: ممتاز
تقييم الجودة: ممتاز
تقييم العملاء: جيد
مواصفات المنتج
No sensor programming Required : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".
Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained professionals.
Part Number: BDEL-37-140
MPREHENSIVE VEHICLE COVERAGE Installation Process:
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Fit Car:
For Mazda 3 (BP)(from 2019-02 to 2024-06)
For Mazda B-Hatch Xev(from 2020-09 to 2027-09)
For Mazda CX-30(from 2019-11 to 2024-10)
colour:Black
Material:ABS
Package Contents:
4 x Tire Pressure Sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the photo a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained professionals.
Part Number: BDEL-37-140
MPREHENSIVE VEHICLE COVERAGE Installation Process:
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Fit Car:
For Mazda 3 (BP)(from 2019-02 to 2024-06)
For Mazda B-Hatch Xev(from 2020-09 to 2027-09)
For Mazda CX-30(from 2019-11 to 2024-10)
colour:Black
Material:ABS
Package Contents:
4 x Tire Pressure Sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the photo a little different from the real thing. The measurement allowed error is +/- 1-3cm.
المواصفات
المواصفات الرئيسية
No sensor programming Required : The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".
Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained professionals.
Part Number: BDEL-37-140
MPREHENSIVE VEHICLE COVERAGE Installation Process:
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Fit Car:
For Mazda 3 (BP)(from 2019-02 to 2024-06)
For Mazda B-Hatch Xev(from 2020-09 to 2027-09)
For Mazda CX-30(from 2019-11 to 2024-10)
colour:Black
Material:ABS
Package Contents:
4 x Tire Pressure Sensor
Only the above package content, other products are not included.
Simplified Relearn : AUTO Relearn Installation of TPMS is recommended to be performed only by trained professionals.
Part Number: BDEL-37-140
MPREHENSIVE VEHICLE COVERAGE Installation Process:
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Fit Car:
For Mazda 3 (BP)(from 2019-02 to 2024-06)
For Mazda B-Hatch Xev(from 2020-09 to 2027-09)
For Mazda CX-30(from 2019-11 to 2024-10)
colour:Black
Material:ABS
Package Contents:
4 x Tire Pressure Sensor
Only the above package content, other products are not included.
محتويات العبوه
4 x Tire Pressure Sensor
المواصفات
- SKU: GE810CA0F6WG9NAFAMZ
- الموديل: Tire pressure sensor
- بلد الصنع: China
- الحجم (طولx عرضx ارتفاع سم): 11x9x4
- اللون: Black
- الخامه الرئيسية: ABS
- عنوان الضمان: None
آراء العملاء الموثقة
لم يتم تقييم المنتج بعد
4Pcs TPMS For For Mazda CX-30 3 (BP) B-Hatch Xev 2019-2024
جنيه 2,223.73
جنيه 4,203.1447%