5 PCS Live Tripod Stand

5 PCS Live Tripod Stand

1. Size: 185x42x36mm
2. Weight: 48g for tripod, 12g for clip
3. Bearing capacity: 500g
4. Camera interface: conventional 1/4-20 screw
5. Applicable models: mobile phones, digital cameras
6. Function introduction: It can be used for mobile phones, entry-level SLR cameras, home DVs, etc. Standard bayonet, universal type. You can wrap it around tree branches, railings, car handrails

Features:
1. Universal flat phone holder/camera holder.
2. Applicable envment: desktop and other planes.
3. Can rotate 360 degrees, support mobile phones below 5.5 size (universal)
4. The soft rubber on both sides and the sponge in the middle can protect the mobile phone from scratches.
5. The universal built-in spring switch can control the size of the fixture to facilitate the placement of different products.

Installation Notes:
1. Pull the clamp to put the phone into the clamp, then let go and use the built-in spring to clamp the phone
2. Expand the 3 tripod and stretch the length of the bracket at the same time to adjust to the required height
3. Rotate the phone angle, select the angle and tighten the ing screw