DC12V 10A Relay 433Mhz Wireless RF Remote Control Switch Transmitter With Receiver Module

【Specifications Of The Receiver】
-- Model Number: KR1201A-4
-- RF Working Mode: Superheterodyne Reception
-- Modulation mode: ASK
-- Working Mode: Momentary, Toggle, Locking and Delay Mode.
-- Input voltage: DC 10~14V
-- RF Frequency: 433MHz
-- Quiescent Current: 5mA
-- Reception Sensitivity: >97dbm
-- Remote Control Range: >100m (Free Space).
-- Wired Connection Way: Fixed Wiring Pillar.
-- Decoding Mode: MCU Software Decoding.
-- Working Mode: Momentary, Toggle, Locked Mode Locking Delay

【Specifications Of The Transmitter】
-- Model Number: KT05-4
-- Frequency: 433MHz
-- Power by 3V Coin Cell Button Battery (Battery included)
-- Material: PVC
-- Button: 2 Buttons
-- Size: 59mm x 28mm x 8mm
-- Operating voltage: 3V
-- Operating current: 12mA
-- Transmit power: 10mw
-- Modulation mode: ASK (AM)
-- Encoding Type: Learning/copy
-- Transfers Distance: 20-50 m
Working mode:
1. Inching mode: press the remote control the relay will connect, and then release the remote control to disconnect the relay;
2. Self-locking mode: press the remote control the relay will connect and press the remote control again to switch the relay;
3. Interlock mode: press the remote key A to close the relay, and press the remote key B to disconnect relay.
4. Delay mode: press the remote control the relay will connect, release the remote control and start timing. After 5S, 10SE and 15S(3 gearS), the relay will be closed automatically.

Learning Methods:

1. Tipping Learning Method:
Press the codePairing button on the control panel once, and the LED indicator will flash once. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

2. Self-locking learning method:
Press the code pairing button on the control panel twice, and the LED indicator will flash twice. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

3. Mutual lock learning method:
Press the code pairing button on the control panel three times, and the LED indicator will flash three times. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

4.5S Delay learning method:
Press the code pairing button on the control panel four times, and the LED indicator will flash four times. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

5. 10S Delay Learning Method:
Press the code pairing button on the control panel five times, and the LED indicator will flash five times. After the LED indicator lit, press the button you need to pairing on the remote control, the LED indicator on th