يستخدم هذا الموقع ملفات تعريف الارتباط. لمزيد من المعلومات حول كيفية استخدامنا لملفات تعريف الارتباط ، يمكنك قراءة إشعار الخصوصية وملفات تعريف الارتباط الخاص بنا. ملفات تعريف الارتباط وسياسة الخصوصية
الصفحة الرئيسيةالكمبيوترالكمبيوتر وملحقاتهملحقات الكمبيوترالمراوح والتبريدخافضاتM.2 NVMe SSD Heat Sink 2mm for M2 2280 Solid State Hard
جنيه 697.20
جنيه 1,080.6635%
Few units left
مصاريف الشحن تبدأ من جنيه 229.16 الي 6 اكتوبر
وفر ١٠ جنيه على مصاريف الشحن عند الدفع مسبقا
0 out of 5
(لا يتوفر تقييم)عروض
التوصيل والارجاع
تم شحنه من الخارج
اختار العنوان
محطة الاستلام
مصاريف الشحن جنيه 229.16
جاهز للاستلام يوم ٠٤ يونيو عند الطلب خلال23hrs 43mins
توصيل للمنزل
مصاريف الشحن جنيه 244.16
يتم التوصيل يوم ٠٤ يونيو عند الطلب خلال 23hrs 43mins
سياسة الارجاع
يمكنك ارجاع اغلب المنتجات خلال 14-30 يوم من تاريخ الشراء، مع ضرورة الإبلاغ عن وجود اي عيب ظاهر في خلال 48 ساعة، للإستثناءات والشروط راجع سياسة الإرجاع من هنا.تفاصيل
بيانات البائع
JG-Yyouty
82 المتابعين
أداء البائع
معدل سرعه توصيل الطلب: ضعيف جدا
مواصفات المنتج
Specification:
Installation Tutorial:
1. Clean the dust and oil stains on the surface of the solid-state drive to facilitate the installation of thermal conductive silicon wafers for a more complete fit.
(Install and fit the entire piece)
(Small piece can be accurately attached to the main control and cache chips of solid-state drives, providing more accurate heat conduction)
2. Tear off the double-sided protective film of the thermal conductive silicon film and onto the hard drive itself. (The thermal conductive silicon film has a slight viscosity and can be easily adsorbed on the hard drive)
3. Add a heat dissipation copper plate and fix it without a rubber ring.
size:
Length 77mm x Width 22mm x Thickness 2mm
Material: copper
colour: copper
note: accessories are randomly colored. Cannot be chosen the specific color.
Package Contents:
1 x 2mm heat sink
2 x M2 screws
11 x thermal silicon chips
3 x fixed rubber rings
1 x warp
1 x screwdriver
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Installation Tutorial:
1. Clean the dust and oil stains on the surface of the solid-state drive to facilitate the installation of thermal conductive silicon wafers for a more complete fit.
(Install and fit the entire piece)
(Small piece can be accurately attached to the main control and cache chips of solid-state drives, providing more accurate heat conduction)
2. Tear off the double-sided protective film of the thermal conductive silicon film and onto the hard drive itself. (The thermal conductive silicon film has a slight viscosity and can be easily adsorbed on the hard drive)
3. Add a heat dissipation copper plate and fix it without a rubber ring.
size:
Length 77mm x Width 22mm x Thickness 2mm
Material: copper
colour: copper
note: accessories are randomly colored. Cannot be chosen the specific color.
Package Contents:
1 x 2mm heat sink
2 x M2 screws
11 x thermal silicon chips
3 x fixed rubber rings
1 x warp
1 x screwdriver
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
المواصفات
المواصفات الرئيسية
Specification:
Installation Tutorial:
1. Clean the dust and oil stains on the surface of the solid-state drive to facilitate the installation of thermal conductive silicon wafers for a more complete fit.
(Install and fit the entire piece)
(Small piece can be accurately attached to the main control and cache chips of solid-state drives, providing more accurate heat conduction)
2. Tear off the double-sided protective film of the thermal conductive silicon film and onto the hard drive itself. (The thermal conductive silicon film has a slight viscosity and can be easily adsorbed on the hard drive)
3. Add a heat dissipation copper plate and fix it without a rubber ring.
size:
Length 77mm x Width 22mm x Thickness 2mm
Material: copper
colour: copper
note: accessories are randomly colored. Cannot be chosen the specific color.
Package Contents:
1 x 2mm heat sink
2 x M2 screws
11 x thermal silicon chips
3 x fixed rubber rings
1 x warp
1 x screwdriver
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Installation Tutorial:
1. Clean the dust and oil stains on the surface of the solid-state drive to facilitate the installation of thermal conductive silicon wafers for a more complete fit.
(Install and fit the entire piece)
(Small piece can be accurately attached to the main control and cache chips of solid-state drives, providing more accurate heat conduction)
2. Tear off the double-sided protective film of the thermal conductive silicon film and onto the hard drive itself. (The thermal conductive silicon film has a slight viscosity and can be easily adsorbed on the hard drive)
3. Add a heat dissipation copper plate and fix it without a rubber ring.
size:
Length 77mm x Width 22mm x Thickness 2mm
Material: copper
colour: copper
note: accessories are randomly colored. Cannot be chosen the specific color.
Package Contents:
1 x 2mm heat sink
2 x M2 screws
11 x thermal silicon chips
3 x fixed rubber rings
1 x warp
1 x screwdriver
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
المواصفات
- SKU: GE810EA012WJANAFAMZ
- الحجم (طولx عرضx ارتفاع سم): 9x3x1.5
- اللون: Copper
آراء العملاء الموثقة
لم يتم تقييم المنتج بعد
M.2 NVMe SSD Heat Sink 2mm for M2 2280 Solid State Hard
جنيه 697.20
جنيه 1,080.6635%