ZJCGO OEM Car Parking r istance Backup System For Toyota Corolla Altis Auris Hybrid E210 2018~2023

Optional custom colors:

Such as 4 black and 4 or 2 black and 6

Applicable models:

for Toyota Corolla Altis Hybrid E210 2018–presentfor Toyota Auris E210 hatchback 2018–2020

Note:

The main function of the is to the princle to send waves from the probe installed on the rear of the car or theper of the front of the car to reflect the sound wave probe when , so as to calculate the actual distance between the car body and the obstacle.

Specification:

Function: Regional warningAr-s service: one yearAlarm volume: 70dB (inclusive) -90dB (inclusive)Working temperature range: -20℃-80℃Test distance: 0.2m-0.8mDisplay type: screen or dasardNumber of probes: 4/8Voice function: visual Whether to disaemble theper: Ye

Host sound speaker reminderWhen the car is close to an object, it will make a sound to remind you

The sound prompts that the darker the color, the closer the distanceObject distance CM-30GM display yellowObject distance 30CM-OCM shows redArea digital is p>

Not affected by the envmentGood waterproof performanceRain does not affect the High temperature resistance without false alarm

car micro-hole non-destructive installationThe car reserved holes for installation to improve the driving safety factor of the car(Some models are not reserved)Hole position is smooth and without burrs Profeional sleek punch artifactThe holes are smooth and beautiful without burr

In D fileFront starts automaticallyIn D gear, the first 4 s are automatically activated and displayed on the dasard of the car. When the vehicle speed exceeds 15KM/H, the will automatically turn off

When R gearAutomatic start of front and rear When in R gear, 4 s on the left and right of the frontper, and 4 s on the rearper are automatically activated. When an obstacle is detected by the , an alarm will sound、

Effect ar installation

Product configuration list

Different models have different configurations1. Host2. wiring harne3. Special probe4 Hole opener5 .Adhesion promoter6 speakers7. switch on

Installation steps：

1. Whether the car has reserved holes, the front and rearpers can be removed directly if there are reserved holes.2. If there is no reserved hole, it is neceary to measure the holedistance according to the model, and make the hole position.

3 Punch a hole in the center of the reserved hole,or punch a hole at the measurement position.4. the provided hole opener to it smoothly

5. Fix the probe.6. Connect the probe socket, arrange the wires,and restore theper.

7. The rearper is treated the same,and the probe is installed.8. Pull the harne

9 Pull up the door frame rubber str and the door sll,prepare to hide the wiring hame on the left.10. Lay the line and restore theper

11. Connect the host12. Insert the reserved plug of the car

13. Restore the wiring harne and detect the functionAr receiving the , you can first test whether the is sensitive or not, it does not rule out that it will be damaged during nsportation.During the installation, theper can not be restored first, and it can be d ar being installed on the car.When theper is restored, it can avoid repeated disaembly of theper.