NANLITE Nanlite AS-WT-PTII 15X Waterproof

Nanlite ASWTPTII15X Overview

When Nanlite describes their LED tube as "go anywhere" they back it up with this Waterproof Housing for PavoTube II 15X. Made from polycarbonate, the clear IP68 housing not only shrugs off rain but can be fully submerged at depths of 32.8 feet.Go AnywhereWith the housing's waterproof IP68 certification for full immersion up to 32.8' your PavoTube II can genuinely be a go-anywhere lightPolycarbonate ConstructionMade from the same material used in PavoTube housings, Polycarbonate allows light to pass through without sacrificing durabilityUltimate ProtectionIP68 rated protection, applicable for underwater or rainy settings, withamaximum depth of 10 meters underwater protection 1/4-20 Mount CompatibleCompatible with the widely used  1/4-20 mounts located at both ends allowing foreasy attachment tomeet more shootingneeds OctagonalDesignOctagonal structuresboth ends,easyfixing High light transmission ratio (LTR)LTR>95%, reduces spill of light, ensuring the quality of light

NANLITE Underwater Housing AS-WT-PTII15X, 68 cm, for PavoTube II 15X

This underwater housing is used to protect a PavoTube II 15X color effect lamp from rain and moisture and to use the lamp under water. It is waterproof up to 10 m depth and has IP68 protection class. The housing has a very good color rendering and reduces stray light due to the high light transmission (light transmission (LT) > 95%).Thanks to the octagonal end piece, the underwater housing can be placed on flat surfaces without rolling away. The light always shines in the desired direction and has a 1/4" connection thread on both ends.