Remax Wireless Earbuds (PD-BT533N) - White Color

 Specifications:
- *Product Model*: PD-BT533H
- *Wireless Version*: VS.4
- *Transmission Distance*: > 10 m
- *Driver Unit*: 13 mm
- *Frequency Response*: 20 Hz - 20 kHz
- *Impedance*: 32 Ohm
- *Rated Power*: 5 mW
- *Charging Case Battery Capacity*: 300 mAh
- *Earbud Battery Capacity*: 35 mAh
- *Charging Cycles with Case*: 24 times
- *Input*: 5V = 1A
- *Playtime*: ≈ 4 hours
- *Standby Time*: 60 hours
- *Charging Time*: Case size 60.5 × 45.3 × 21 mm

How to Use:
- *Reject Call*: Press L/R twice.
- *Answer Call*: Press L/R once.
- *End Call*: Press L/R once.
- *Play/Pause*: Press L/R once.
- *Next Track*: Press L/R twice.
- *Previous Track*: Press L/R three times.
- *Volume Down*: Swipe down on the touch area L/R.
- *Volume Up*: Swipe up on the touch area L/R.

Additional Features:
- *Active Noise Cancellation/Adaptive Transparency*: For iOS users, press and hold the touch area L/R to switch between active noise cancellation and adaptive transparency. For Android users, press and hold the right earbud to switch.
- *Enable Siri/Voice Assistant*: For iOS users, press and hold the touch area L/R (which is used by default to switch between active noise cancellation and adaptive transparency; please change the settings in the phone). For Android users, press and hold the touch area L (please ensure that the phone supports voice assistant).

Using with One Earbud:
Open the charging case, and the earbuds will automatically turn on. After a successful wireless connection, take only one earbud out and close the charging case to use a single earbud.

LED Indicators for Charging Case:
- When charging the charging case: Orange light on for 8 seconds at the start of charging, green light on for 8 seconds when fully charged.
- When charging the earbuds: The earbuds will draw power from the charging case automatically once placed inside until fully charged.

Wireless Connection:
1. Open the charging case lid, do not take the earbuds out, enable wireless connection on your phone, search for devices, and select "PD-BT53311" to connect.

Unpairing:
Press the charging case button for 15 seconds to unpair; hold the button for 15 seconds, and the blinking light will change from white to orange, indicating that devices have been unpaired.

Alerts:
1. Place the wireless earbuds and your phone (or other wireless devices) within 1 meter of each other.
2. Wireless connection is available with the charging case lid open and the earbuds inside.
3. Check if the earbuds are connected to each other after taking them out before connecting wirelessly to your phone.
4. Do not close the charging case lid while wirelessly connected with the earbuds inside.
5. If the earbuds are in a charged charging case and fail to connect wirelessly with the lid open, connect the charging cable to charge for at least one hour.

Warnings:
1. Do not use any abrasive cleaning materials to clean the product.
2. Do not place the product near a fire source, such as a stove.
3. Do not expose the product to direct sunlight or high-temperature environments.
4. Do not dispose of the product in fire to avoid hazards.
5. Do not disassemble or modify the product.
6. Do not use the product in the rain.
7. Store the product in a dry place if not in use. Charge it at least once a month to extend battery life. Avoid extreme temperatures and dust accumulation.

سماعة رأس لاسيلكية