915 Generation for 20-21 Center Console Screw Cover on Both Sides Silver

Without damaging the car, directly press the product on the knob, and it only takes a few seconds to complete the installation.
Can be used for a long time
Made of aluminum alloy, with corrosion resistance, can accompany the car .
center console screw protective cover on both sides
For 2020-21 Installation instructions:
1)Wipe the surface where you to stick. Keep dry and clean.
2)Determine the installation location and then make comparison of the product and installation location. If the product doesn't fit your vehicle, contact us immediately and DO NOT INSTALL.
3)When tearing off the double-sided adhesive of cover , you can't Press the double sided paste with your hand.
4)In order to achieve better effect, if the temperature is 20 degrees, we suggest heating double sided adhesive with hair dryer or lighter .(Do not heat over 40 degrees).
5)Align position and then paste. The paste effect depends on paste conditions and installation.
6) do press hard especially on the edges at least 2 mins after installing.
7) 't Press water and Keep dry after been install at least 72 hours. Or it will easy to fall off.
Material:Aluminum alloy
colour:Silver Package Contents:
8 x center console screw protective cover on both sides Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.