915 Generation POE 1000M Network Protector POE 1000M Monitor Camera Surge P

Item Description
POE 1000M Network -Protector POE 1000M monitor Camera Surge Protector RJ45 Gigabit Ethernet Protection device Arrester
1000M RJ45 Ethernet Cat5e/6 surge protector with POE support. It simply installs in-line on an RJ45 Cat5e/6 cable. The arrestor has two RJ45 female jacks, so in-line installation is a easy and straight forward.
It protects any Ethernet devices like switches, routers, laptops/PCs,IP Camera etc from damaging surges caused by- or static electricity. Moreover, because of PoE feature it ALLOWS PoE enabled devices to remain powered while still against damaging -strikes or voltage spikes. Material: plastic + metal
Color as shown
Features
Fast energy absorption on over-voltage
Low resistance and capacitance - influence on data link
Easy in-line installation: two RJ45 female connectors
Specification
Product Name: Gigabit POE Network -Protector
Protection object: POE network switch, POE camera, terminal with POE power supply function
Interface: RJ45
Response time Less than 1ns
Rated operating voltage: 48V rate: 1000Mbps
Continuous operating voltage: 57V
Working temperature: -30 ~ 70 degrees Celsius
Operating humidity: 30%-90% notes:
Two things are crucial and should NOT be missed when using Ethernet surge protector. positioning: IN on unprotected part of cable and OUT on side of cable.
Reversed installation will still allow network and operation there will be no-/surge protection at all!
proper grounding: note yellow/green ground wire. This wire must be connected to proper electrical ground in .
Ask a qualified electrician about such grounding or search Internet for information.
Without proper grounding surge protector will be unable to drain the excess voltage and will be ineffective! Package Contents:
1 x POE Network -Surge Protection Device Only above package content, other are not included.
Note: Light reflection and different displays may cause color of item in a little different from real . The measurement allowed error is +/- 1-3cm.