1 to 4 PoE Extender 10/100M 4 Port PoE IEEE802.3At Poe I

Features: Comply with IEEE 802.3af/at/BT Power over Ethernet; 1 POE to 4 POE,10/100Mbps Supported
Extender the range of PoE an additional 250 meters; Automatically detects and protects PoE equipments from being damagedbyincorrect installation
Plug-and Play no configuration required; 60W 4 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable.
Product Review: Comply with 10/100BASE-TX,IEEE 802.3af/at/BT-PoE. Power input for single port is 60W (POE++,BT) . Power output for single port is 30W.
Applicable Range: Used with AP,IP camera,IP telephone and the other network equipments inthesituation of the lack of power line or far away from the power outlets Installed at hotels,schools,buildings,villages,etc.

Specification:
PoE input: 1 RJ45 port
PoE output: 4 RJ45 port
Network Medium: Cat5 or better UTP cables (less than 250m)
Repeater Mode: Store and forward
MAC Address Table: 2K
Packet Buffer Memory: 48 Byte
Switching Capacity: 400Mbps
PoE Standard: IEEE 802.3af/at/BT
Input power: 60 Watts
Output power: 30 Watts (max)
Power Supply Type: 1/2+,3/6-,Mode A,End-Span
Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE802.3x-Flow Control, IEEE 802.3at/BT-Power over Ethernet;
Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU,LowVoltageDirective 2014/35/EU,EMC Directive 2004/108/EC;
Storage Humidity: 5%~90%, No Condensation;
Dimension: 95x70x21mm
Note:
Please don't place any heavy thing on the PoE extender;
To prevent the water seeping into the extender,please keep PoE extender awaywet environment;
Suggest to use PoE extender indoors.When installing the extender inoutdoor,please install it in a waterproof place.
Style: 100M
Color: Black
Material: metal

Package Contents:
1 x PoE Extender

Only the above package content,other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.