1~6M AN12 12AN Nylon Stainless Steel Bred PTFE Racing Brake Hose E85 Oil Cooler Line Tube Swivel Hose End Fittings

1-6M AN12 12AN Racing Hose Nylon 304 Stainle Steel Bred PTFE Brake Hose E85 Oil Cooler Line Swivel Hose End Fitting

Note:1."ANx" is model instead of size.Please find the size detail in the size chart.2. The length of product is full length which mention in option. If you want e a custom cut of the product, please feel free to contact us for help.3. All products in this link are compatible each other, you just need to e a chose the product what you want.4.The material of PTFE doesn't support overbending. Please be careful when using.

Specification:Condition: NewProduct Name: Hose Oil LineLength: 1M/2M/3M/4M/5M/6MType: AN12Surface Finish: BredNylon HoseOutside Material: Nylon + Stainle Steel WiresInner Hose Material:PTFEColor: BlackWorking Temperature: -60 ℃ To 260 ℃Working Preure: 1000 PSIBurst preure: 4000 PSIHose Inside Diameter:16.26mm/0.64inchHose Outside Diameter:20.8mm/0.81inchStainle Steel HoseOutside Material: Stainle Steel WiresInner Hose Material:PTFEColor: SierWorking Temperature: -60 ℃ To 260 ℃Working Preure: 1000 PSIBurst preure: 4000 PSIHose Inside Diameter:16.26mm/0.64inchHose Outside Diameter: 19.3mm/0.75inch

Application:

For PTFE Hose End Fitting Only.

For Most s. (Automotive s, s, Coot, Brake and E85 .)

For High Temperature High Preure Applications. ( injection hose, Turbo oil feed and boost line, nsmiion oil cooler line, EFI line, Carb line, IS engine swap line, return line, return line, Vacuum line, supply line.)

Features:

100% quality aurance d, more responsive, le expensive, easier to install.

PTFE inner layer and one layer of polyester, one layer of stainle steel wrapped.

PTFE hose relatively hard, it can't be bend and folding in half.

Hold up a lot stronger to heat and extreme cirstances.

Will not deteriorate or swell over time.

Installation Notices:

1.Avoid twisting hose when installing.

2.Allow some slain aembly in length for changes that occur under preure.

3.When routing hose line, provide a smooth bend radius. Avoid sharp bends which may ca hose to collapse and restrict flow.

PTFE Hose End FittingSize/AN: AN12

Color: Black/Blue Red

Material: Aluminum Alloy

Angle: Sight,45 Degree,90 Degree,180Degree

Descrtion:

【High Quality】PTFE Hose Fitting is made of lightweight aluminum alloy ,material for strong strength and good bility. Blaanodized for great appearance and anti-corrosion, rior thread strength.

【Applications】PTFE Hose Fitting is widely d in oil/ / water/ / air/ line, specially for E85 ethanol oline.Work with all PTFE stainle bred and nylon bred hoses.Please Attention that the PTFE hose end can be work with PTFE line ONLY.

【Easy to 】PTFE Hose Fitting swivel 360° to allow for a quialignment of the hose,easy to and don't require special equment. Weld-free construction that gives better flow and integrity over the normal brazed together hose ends.