يستخدم هذا الموقع ملفات تعريف الارتباط. لمزيد من المعلومات حول كيفية استخدامنا لملفات تعريف الارتباط ، يمكنك قراءة إشعار الخصوصية وملفات تعريف الارتباط الخاص بنا. ملفات تعريف الارتباط وسياسة الخصوصية
502M 502H 1002M 50W*2 100W*2 TPA3116D2 Dial Audio Power Amplifier Board Stereo BT5.0 USB Mini AMP AUX Wuzhi Audio USB
In stock
عروض
التوصيل والارجاع
تم شحنه من الخارج
اختار العنوان
توصيل للمنزل
سياسة الارجاع
يمكنك ارجاع اغلب المنتجات خلال 14-30 يوم من تاريخ الشراء، مع ضرورة الإبلاغ عن وجود اي عيب ظاهر في خلال 48 ساعة، للإستثناءات والشروط راجع سياسة الإرجاع من هنا.تفاصيل
بيانات البائع
chen489
60%تقييم البائع
كن أول المتابعين
أداء البائع
معدل سرعه توصيل الطلب: ممتاز
مواصفات المنتج
Note!
It needs to be aembled by yours, and the material package is given a screwdriver.
The suitable power supply of the product is DC power supply, and AC power supply is not allowed!
The color of the product may be slightly different from the picture due to the differences of light, angle and shooting equipment.
The product size is measured manually. Please allow slight deviation in the measurement data and e sure you don't mind.
The power supply can not be connected to the 24V battery pack. (The actual maximum voltage of 24V battery is about 28V)
Tip: To have enough output power if the audio input is sufficient and the supply voltage/current is sufficient. The power supply voltage is higher and the relative power will be larger. The speakers with different impedances will have different output power. In the case of sufficient voltage and current, the larger the s of the horn, the smaller the relative sound power. Please pay attention!
Product comparison tableModel
502M
502H
1002M
Picture
Feature
1.Chinese chip .
2.Unfiltered,standard
sound quality.
1.TPA3116D2 chip.
2.With filter,high performance
filter, sound quality.
1.Chinese chip .
2.Unfiltered, general
filter, high quality sound quality.
Audio input
BT+AUX+USB f disk + Computer
USB
BT+AUX+USB f disk + Computer USB
BT+AUX+USB f disk + Computer USB
Power
50W+50W
50W+50W
100W+100W
Heat sink
20*18*10mm Heat sink
20*18*10mm Heat sink
36*25*10mm Heat sink
Power supply
DC5-24V
DC9-24V
DC5-24V
Speaker
10~100W,4~8Ω
10~100W,4~8Ω
20~200W,4~8Ω
Protection
Overheat,
Over current,
Short circuit protection
Overvoltage,
Undervoltage,
Overheating,
DC ,
Short circuit protection
Overheat,
Over current,
Short circuit protection
Product size
60*60*29mm
60*60*29mm
60*60*29mm
Package weight
about 96g
about 104g
about 104g
Model:ZK-502M502M Specification sBrand: Wuzhi Audio
Product Name: Mini 50W*2 BT 5.0 power amplifier module
Product Model: ZK-502M
Chip Model: Chinese amplifier chip
Audio Input: AUX + BT+USB f disk + Computer USB (plug and play)
Power Supply: DC5~24V (high power recommended high voltage)
Adapter Speaker: 10~100W, 4~8Ω
s: left and right stereo (stereo)
BT Version: 5.0 (>15 meters without occlusion)
BT Name: Wuzhi Audio
Protection Mechanism: Overheat, Over current, Short circuit protection
Power supply voltage:
12V-----8Ω/12W+12W,4Ω/20W+20W
15V-----8Ω/18W+18W,4Ω/30W+30W
19V-----8Ω/30W+30W,4Ω/40W+40W
24V-----8Ω/40W+40W,4Ω/50W+50W
Product Size: 60mm*60mm*29mm
Product Weight: about 60g
Package Weight: about 96g
502M Product Wiring Diagram① Chinese amplifier chip
② USB f disk or computer USB input
③ BT input
④ Audio input
⑤ Switch
⑥ Volume
⑦ Power input (5.5x2.1 DC plug)
⑧ Right (Connected to paive speaker)
⑨ Left (Connected to paive speaker)
⑩ Audio output (Connected to active speaker)
Note: Paive speakers and active speakers can only choose one.USB f drive file system must be FAT32, maximum support 32GB.
502M Installation Diagram① Key cap
② Knob
③ 20*18*10mm heat sink
④ M2*12 copper ar
⑤ M2*7 screw
⑥ Upper cover board
⑦
⑧ Lower cover board
502M Product Size502M Packing listModel:ZK-502H502H Specification sProduct Name: 50W*2 BT 5.0 power amplifier module
Product Model: ZK-502H
Chip Model: TPA3116D2 amplifier chip(with AM interference suppreion)
Audio Input: AUX + BT + USB f disk + Computer USB sound card (plug and play)
Power Supply: DC9~24V (high power recommended high voltage)
Adapter Speaker: 10~100W, 4~8Ω
s: left and right stereo (stereo)
BT Version: 5.0 (>15 meters without occlusion)
BT Name: Wuzhi Audio
Protection Mechanism: overvoltage, under voltage, overheating, DC , short circuit protection
Power supply voltage:
12V-----8Ω/12W+12W, 4Ω/20W+20W
15V-----8Ω/18W+18W, 4Ω/30W+30W
19V-----8Ω/32W+32W, 4Ω/40W+40W
24V-----8Ω/38W+38W, 4Ω/50W+50W
Product Size: 60mm*60mm*29mm
Product Weight: about 68g
Package Weight: about104g
502H Product Wiring Diagram① TPA3116D2 amplifier chip
② USB f disk or computer USB input
③ BT input
④ Audio input
⑤ Switch
⑥ Volume
⑦ Power input (5.5x2.1 DC plug)
⑧ Right (Connected to paive speaker)
⑨ Left (Connected to paive speaker)
⑩ Audio output (Connected to active speaker)
Note: Paive speakers and active speakers can only choose one.USB f drive file system must be FAT32, maximum support 32GB
502H Product Size502H Packing listModel:ZK-1002M1002M Specification sProduct Name: Mini 100W*2 BT 5.0 power amplifier module
Product Model: ZK-1002M
Chip Model: Chinese amplifier chip
Audio Input: AUX + BT+USB f disk + Computer USB (plug and play)
Power Supply: DC5~24V (high power recommended high voltage)
Adapter Speaker: 20~200W, 4~8Ω
s: left and right stereo (stereo)
BT Version: 5.0 (>15 meters without occlusion)
BT Name: Wuzhi Audio
Protection Mechanism: Overheat, Over current, short circuit protection
Power supply voltage:
12V-----8Ω/20W+20W, 4Ω/40W+40W
15V-----8Ω/35W+35W, 4Ω/60W+60W
19V-----8Ω/55W+55W, 4Ω/80W+80W
24V-----8Ω/70W+70W, 4Ω/100W+100W
Product Size: 60mm*60mm*29mm
Product Weight: about 66g
Package Weight: about 104g
1002M Product Wiring Diagram① Chinese amplifier chip
② USB f disk or computer USB input
③ BT input
④ Audio input
⑤ Switch
⑥ Volume
⑦ Power input (5.5x2.1 DC plug)
⑧ Right (Connected to paive speaker)
⑨ Left (Connected to paive speaker)
⑩ Audio output (Connected to active speaker)
Note: Paive speakers and active speakers can only choose one.USB f drive file system must be FAT32, maximum support 32GB.
1002M Product Size1002M Packing listQuestion and answer
1. How to choose a power supply?
The power supply for the module is critical. The power supply requires small output ripple and low internal resistance. The higher the voltage, the higher the current and the better the output power. If you only have 12V 2A(502H and 502M:12V 1A), you can bring a 3-4 inch speaker. If you are 19V 5A or above, there is no problem with 8-10 inches, and the power supply must be highly valued. If the voltage is too low, the sound will be distorted after the sound is amplified. If the current is too small, the speaker will pull the voltage low, work abnormally or the sound quality will deteriorate.
It is recommended to use 18V19V24V power supply with current above 3A. If you only have 9V12V or 1A 2A power supply, it can also be used but the power is small. Please pay attention to the maximum volume when using it, which may affect the sound quality.
2. How to choose a speaker?
The commonly used horn is usually 4 or 8 . If your speaker power is small, it may be used between 20W-50W(502H and 502M:10W-30W). The power supply voltage is small to prevent the amplifier from ing out after ing. For example, select a power supply below 15V.If you are a 50W-200W(502H and 502M:50W-100W)speaker, don't worry about the speaker out. You can choose 12-24V power supply. The higher the voltage you choose, the louder the output sound or power. The speaker power is not recommended to exceed 100W, otherwise the sound quality will be affected.
3. How to choose BT or AUX audio input mode?
This audio amplifier module follows the prince of hardware connection first. A succeful USB connection is in USB mode, and AUX insertion is in AUX mode. If the USB is not connected and AUX is not plued in, it is in BT mode, which supports automatic reconnection. Mode tole with mode prompt. When choosing USB audio input mode, it is ant to note that USB can directly connect to the computer and other devices with USB audio output without installing a driver. USB input is lole input, good sound quality, no interference, no noise.
4. When the sound becomes louder, the phenomenon of turbid sound appears.
The sound is distorted. Please change the adapter power supply with a higher voltage rating.
5. After the sound becomes louder, the sound is stuck.
The input power is insufficient, and the power supply its is intermittently powered off. Please rep the power supply with a larger power. Or the output power is too large, the power amplifier board is seriously heated, and thermal protection occurs, reducing power usage or enhancing heat diipation.
المواصفات
المواصفات الرئيسية
- Yes:Package
- 60*60*29mm:Dimensions (WxHxD))
- ZK-502M/ZK-502H/ZK-1002M:Model Number
- Speakers:Compatible Audio & Video Equipment Style
- WEGE:Brand Name
- Mainland China:Origin
- CE:Certification
محتويات العبوه
المواصفات
- SKU: GE810EA00S77ONAFAMZ
- الموديل: ZHIyunsuanfdaqixp686
- بلد الصنع: China
- اللون: 502H
- الخامه الرئيسية: PVC
- ملصقات العناية: No direct sundlight, cleaning with low percentage alcohol
- نوع المتجر: Jumia Mall
آراء العملاء الموثقة
لم يتم تقييم المنتج بعد