6Pcs Guitar Neck Shim Maple Wooden Shaped 0.25 0.5,1 De

About the product: 1. Used to change the angle of a bolt-on guitar neck
2. Made of solid maple to match the guitar neck
3. the typical homemade "guitar pick" neck joint shims, which create an unwanted Space, these tapered shims cover the entire heel of the neck
4. Keep these on hand for a quick turnaround on this common repair
5. Set includes 3 hard maple shims in the following tapers: 0.25-degree taper, 0.5-degree taper and 1-degree taper

Description:
Brand:
This set includes 3 hard maple shims, each at a different taper for changing the pitch of any bolt-on neck:
0.25-degree shim offers the most versatility - stacking them will let you really dial in the neck angle you're after.
0.5-degree taper is you'll reach for most often - on and many other solidbody guitars.
1-degree taper for guitars with a Tune-o- bridge or For Floyd .
Dimensions: 2-3/16 inch x 3 inch (55.56mm x 76.12mm)
Taper specs (approximate):
0.25-degree tapers from 0.030 inch to 0.019 inch (0.76mm to .048mm)
0.5-degree tapers from 0.028 inch to 0.008 inch (0.71mm to .020mm)
1-degree tapers from 0.060 inch to 0.010 inch (1.52mm to .025mm)
Material: Maple
colour:Wood color

Package Contents:
6 x Neck Shims

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.