Car Trunk Switch Button Assembly For Chevrolet Cruze 2009 To 2014 Luggage Box Open And Close Button Switch Assembly Car Styling

This trunk switch With USB connector 

Note: USB works if it is connect with navigation, that means only if your car have navigation, USB will work.

 if your car have no navigation,please don\'t buy it. Be care.

Applicable car: For Chevrolet Cruze 2009 2010 2011 2012 2013 2014 Left Hand Drive

1.The model with USB, with light, USB is for USB flash disk,The USB only read U drive, USB specially designed for car with navigation, this means that your car must have navigation, USB can work.

===================================================================

===================================================================

2.The model with light and USB for Charging, USB only for charging.

=========================================================================== ====

===============================================================================

3. The model with light, NO USB.

Installation:

1.Remove the decorative board on the edge of the co-pilot;

2.Pry loose cds decorative panel;

3.Find pink plug,pull out and find out the yellow-blue line.Don\'t pull hand,there is a button to press down,it will come out;

4.Cut the plastic and put the red line to the yellow-blue line;

5.Match the red line of switch assembly to others lines;

6.Connect the black line of switch assembly to ground (connect to iron);

7.Romover the CD decoration panels;

8.Pry loose air conditioning panel and put it down;

9.Romove the air conditioning button panel;

10.Unplug the keyboard plugs;

11.Replace the original switch and reconnect the red line;

12.Install back all the decorating plate and keyboard.