e Machine Universal QuiIntake Adaptor QuiSeal Intake Exhaust Adapter For Car Leak Tool

QuiIntake Adaptor For Automotive e Leak

If the bladder/rubber of your intake adapter is broken or splits, you can buy the spare rubber as a repment.Diameter: about 37.5mm/1.48inLength: about 113mm/4.45inPlease chethe , it will teach you how to rep the bladder/rubber.

Attention:

1. Please allow 1cm error due to manual measurement. pls e sure you do not mind before you bid.2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!3. Please Clean the inner wall of the intake opening while the Air Filter, and the Throttle connections are removed,so as not to scratch the adapter.4. This bladder is suitable for the universal intake adapter only !!!

Universal inatake Adapter:

●Universal intake adaptor is an inflatable blooff bladder with a preurized pa-through that allows technicians to test an entire intake or exhaust syst quickly and easily.●Universal intake adaptor can be used with any brand of e machine or leak to reduce workload on a leak check.●Blooff bladder conforms to any shape of intake / exhaust: Round, oval, square, rectangular and even severely angled and hard to reach intake / exhaust syst, while allowing to pa through for fast s.●Compatible with any e machine, It fits 100% of automobiles, from paenger car to heavy-duty trucks, to quickly leak test the integrity of the entire induction system with one simple procedure.

Advantages:

●Fit most cars and light trucks●Quiseal intake/exhaust easily●Reduce workload in a leak check●Fits any shape of intake/exhaust (diamter greater than 2") :round,oval,square,rectangular and even severelly angled and hard to reach intake/exhaust syst●Work with any brand of e machine or leak

QuiStart Instruction:

1 Clean the inner wall of the intake opening while the Air Filter, and the Throttle connections are removed,so as not to scratch the adapter.2 Close the Preure Relief Valve(A) next to the Hand (B).3 Put the Rubber Component(C) into the intake opening.4 Inflate the Rubeber Component(C) by preing the Hand Punm(B) till the intake opening is tightli sealed.5 Now the system is ready to test,introduce air/e into the system by plug the e nozzle into the Tube Opening(D).6 After test,pull off the e nozzle,release the inflated air by open the Preure Relief Valve(A) next to the Hand (B).7 Clean the adapter for storage,avoid contact with corrosivs.

Packing List:

1pc x Intake Bladderor 2pcs * Spare Rubber

Attention Please:

1. Inflating is to seal the air inlet, it still can work as normal even if the inflated airbag is not a perfectly round.2. Please e sure the diameter of intake/exhaust is greater than 2"