M.2 To Converter B M Key Riser Board M.2 SSD To 2.5 22Pin Controller Support 2230 2242 2260 2280 M2 SSD

M.2 To Converter 2.5 Inch Hard Disk Adapter Board 3.0 6Gbps Converter Card Support 2230 2242 2260 2280 M2 SSD

Feature:1. + to Integration Card:Dual M.2 - interfaces of M2 adapter, not compatible with NVMe -E protocol. Supports M.2 protocol SSDs. Requires inserting two SSD that will be merged into one drive.2. + M to Integration Card:M.2 - + M interfaces of M2 add on card, not compatible with NVMe -E protocol. Allows you to connect m and M.2 hard drives to a 22PIN interface. Requires inserting two drives that will be merged into one.3. + M Dual- Card:Can simultaneously insert two SSD, but only one can be recognized at a time. M2 to Adapter is suitable for B-key or B/M-key interfaces, not compatible with M-key interfaces. Supports protocol M.2 hard drives.4. to Single Interface:Converts M.2 SSD to a 2.5-inch (6Gbps) interface. Hard disk adapter board Supports B key and B+M Key M.2 SSDs based on . Not compatible with M key or M+B key (NVMe AHCI) SSDs based on -e.5. M to Single Interface:This converter card Supports conversion of 30mm*50mm size m SSDs to a standard 2.5-inch 6.0Gbps interface. Backward compatible with 3.0Gbps and 1.5Gbps. Only compatible with m Mini E SSDs, not compatible with Mini E SSDs and PATA Mini E SSD.

Specification:Origin: Maind ChinaPackage Size: 120.00x100.00x20.00mm/4.72x3.94x0.79inchP of Origin (Country or Region): Maind China (Origin)A: + to Integration CardSize: 10*7*0.9cm/3.9*2.7*0.35inDual M.2 - interfaces, nvme -e protocol not supportedProduct Features:1.Only support M.2 protocol SSD , does not support NME protocol and PC-E protocol SSDs2 must be inserted at the same time 2 SSD in order to , try to the same brand specifications will be compatible with a good point3. The first time you the SSD will reset the initialisation of the SSD, baup your hard drive information before .4. When using 2 hard drives to form a JBOD, 2 discs into a diskB :+M to Integration CardSize: 10*7*0.7cm/3.9*2.7*2.7inM.2 -+M interface, does not support nvme -e protocolProduct Features:1.Adapt m and M,2 defined hard drive to 22PIN interface2.You must plug in 2 discs at the same time to it! If there is only one hard disc, please buy a single port adapter card.3. The first time you the first repair tool to repair the partition formatting4. This adapter is a dual-disk JB0OD mode, that is, the capacity to add up. 2 discs into a disc!C:+M to Dual Purpose CardSize: 10*7*0.7cm/3.9*2.7*2.7inTwo SSDs can be inserted at the same time, only one SSD can be recognised at a time, the switch needs to be flicked to the corresponding position in the sectionThis adapter is only suitable for B-key or B/M-key interface, not for M-key interface. The adapter only works with B-key or B/M-key interfaces, not with M-key interfaces. a switch design that does not support the AHCI and NVME protocols, with the mode switch switching up and the M mode switch switching down. only m2 drives that support the protocol ():1. Converts SSDs to support M.2 or M to 2.5"/3.5" drives.2. Fully compatible with 3.1 standard3. Compatible with Expre M.2 protocol4. and M SSDs allow an input voltage of 3.3V and a maximum current of 3A. This adapter has no , so there is no speed or anything like that. It only acts as a nsfer function. The speed is related to the SSD its.5. Support 80mm 60mm 42m0mm M.2 SSDs6. Supports full-height and half-height size M SSDsD: to single interfaceSize: 10.2*4.8cm/4.0*1.8inFunction:1. Convert M.2 SSD to 2.5-inch (6Gbps) interface2. M.2 SSD to 2.5-inch adapter converter supports -based B key and B+M key M.2 SSDs3. Maximise system speed by increasing M.2 SSD performance4. Reduce overall power consumption with efficient M.2 SSDs5. Supports Revision I/II/III (1.5/3.0/6.0 Gbps)6. Supports full-length M.2 ( Generation Form Factor) SSDs (2230, 2242, 2260, 2280)Caution:It does not support -e based "M key" or "M+B key" (NVME AHCI) SSDs.E:M to single interfaceSize: Approx. 57x46mm/ 2.24x1.81"Support 30mm*50mm size m SSD converted to standard 2.5" 6.0Gbps interfaceBoth backwards 3.0Gbps and 1.5GbpsProperties such as speed are unchanged, just the form-factor conversion interface, as such a conversion does not need to go through an integrated circuit You can connect it to your laptop or desktop without any driver.This product only supports m Mini E SSDs, not Mini E SSDs and PATA Mini E SSDs.Note:Due to the different and light effect, the actual color of the item might be slightly different from the color showed on the tures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.

1 x M2 Adapter