NEJE E30130 Laser Engraving Module

NEJE E30130 Laser Engraving Module
1. Cylindrical lens optical compression technology
2. Fixed focus
3. Thread enhanced heat dissipation process
4. Intelligent drive, silent design
5. Anti-surge and anti-static design
6. Equipped with inner cavity air-assisted design, supporting 1.5MPa clean air pressure
7. Double ball high-speed cooling fan design, super durable life
Specification
1. Focus: 0.05x0.05mm
2. Focus method: fixed ( about 10mm from the bottom )
3. Optical power: CW 5.5W+, Pulse 7.5W
4. Wavelength: 450nm
5. Weight: 210g
6. Module Size: 30x30x130 mm
7. Input: DC 12V 3A
8. Interface: 4Pin PH2.0
9. Compatible with: NEJE 3 Max, NEJE 3 Pro, NEJE 3 Plus, NEJE 2s Max, NEJE 2s Plus, etc...
10. Power Control: PWM Power Modulation
11. Temperature control: 45 degrees Celsius
Package Included
1 x Laser Engraving Module
1 x Sliding fixture
1 x 4 Pin Cable(30cm)
1 x 2pin yellow and black signal cable + 3pin input cable
1 x NEJE Interface adapter board
1 x 2.5mm L-shaped wrench
1 x 5mm L-shaped wrench
1 x Air Assist