NVME R Card Express 4.0 X16 to 4 Port NVME Expansion Card Adapter 4x 32Gbps M.2 NVME SSD M Key ~E Split Card Riser

About Descrtion:

ant Ts:

dear friend, please e sure that the e x16 slot of your supports e signal splitting into 4 e x4. If support, you need in bios setting “EX16 Bifurcation” - “E 4x4” . Otherwise only support one nvme. Thanks!

Feature:1. -E X16 4-disk expansion card with 4* 32Gbps full-speed signal and simultaneous expansion.2. The main board supports -E split or -E R function, and supports -E 3.0 and 4.0 nsmiion protocols.3. 4-disk solid-state drive array card, solid structure, thi, stable EX16 interface, care for your ant data.4. Support 4-disk soft R, realize soft R under WIN10, 4-disk consistency is good and R is stable.5. Do not drop disk, slow down, and block, and high-power DC power to ensure the stable operation of M.2 NVME SSD.6. The technology is mature, and you can it with confidence. Only when four disks correspond to four LED indicators, the SSD acce LED will light up, and the SSD read and write LED will f.7. Multi-system compatibility, compatibility with various mainstream operating syst, drive-, plug-in and (PS: other syst need to install drivers except Win8/10 system).

Specifications:Name: 4 sets of NVME R -E X16 split cardType: NVME R CardHard disk support: M.2 NVME SSD, not support m.2 protocol d.nsmiion speed: 4*32Gbps

Instructions for :The main board supports -E split function and can set -E X4X4X4 or 4X4 mode;The main board supports -E R function;

You'll receive:

1 x E 4.0 X16 to 4Port NVME R Card1 x Screwdriver1 x Set of Screws

Please chetures for more details.