Solar Charge Controller 12V24V Lithium Lead Acid Battery Solar Controller PMW Charging Management Solar Charger Regulator 10A

Solar Charge Controller 12V/24V Lithium Lead-acid Battery Solar Controller PMW Charging Management Solar Charger Regulator 10A

Features:
1. Large screen: Dispaly voltage reading, charging mark (slow flash: direct charge/boost charge; steady light: float charge/full charge), load mark, output mark, 5-segment battery level mark.
2. Three load modes: Load normally open mode, light control +1-23H timing off, pure light control mode, which can be chosen according to actual needs.
3. Dual USB output: Adopt industrial-grade main control , 2-way USB output, maximum current up to 2.5A, support i-phone charging.
4. Safe use: Complete 3-stage PMW charging management, ultra-low heat generation, safe and convenient to use.
5. Applicable battery: Suitable for 3 kinds of batteries: lead-acid battery (12V/24V battery automatic identification), lithium battery, lithium phosphate battery.
Description:
The solar charge controller supports load normally open mode, light control +1-23H timing off and pure light control mode, suitable for 3 kinds of batteries: lead-acid battery (12V/24V battery automatic identification), lithium battery and lithium phosphate battery.
Specifications:
Size: 133.5*70*35mm
System voltage: 12-24V
Rated charging current: 10A
Rated discharge current: 10A
Maximum PV voltage: 12V battery, up to 23V; 24V battery, up to 46V
Battery type: B1=lead-acid battery 12V/24V battery automatic identification; B2=lithium-ion battery (lithium battery) 3 strings 3.7V=11.1V; B3=4 strings of lithium phosphate battery 3.2V=12.8V
Charge cut-off voltage: 14.4V(B1) 12.6V(B2) 14.6VB3)
Discharge cut-off voltage: 10.7V(B1) 9V(B2) 10V(B3)
Discharge recovery voltage: 12.6V(B1) 10.5V(B2) 12V(B3)
Threshold of light-controlled light-on: photovoltaic panel 8V (light-controlled light-on has a delay)
Threshold of light-controlled light-off: photovoltaic panel 8V (light-controlled light-off has a delay)
USB output: 2-way USB output, 5V/2.5A (maximum)
Standby current: