Updated 2 in 1 Electric Wireless Dog Fence and Remote ining System Waterproof and Rechargeable Collar With 1/2/3 Collar

Intelligent 2 in 1 Wirele Electric Pet Fence & Dog ining Collar

Smart 2 in 1 wirele pet fence is the newest product in market, design is very novelty and combine ining collar with wirele pet fence, it’s easy for operating and mode switch.

It can be used on table or outside and it is effective to in pet developing good habits.

With 1 Collar Product Package1 * Wirele nsmitter1 * Collar Receiver1 * Adjustable TPU sp1 * Charger1 * Test Light Tool2 * Screws4 * Metal Probes4 * Silicone s1 * User Manual

With 2 Collar Product Package1 * Wirele nsmitter2 * Collar Receiver2 * Adjustable TPU sp1 * Charger1 * Test Light Tool2 * Screw * Metal Probe * Silicone s1 * User Manual

With 3 Collar Product Package

1 * Wirele nsmitter3 * Collar Receiver3 * Adjustable TPU sp1 * Charger1 * Test Light Tool2 * Screws12 * Metal Probes12 * Silicone s1 * User Manual

Characteristic:1. 2 in 1 function；LED display, Wirele pet fence &Remote control (Beep+ion + Shock )2. LED display 5 levels signal fence distance(According to the environment, therewill be a gap of ± 16ft )100 feet, 200 feet, 300 feet, 500 feet, 990 feet3. Both nsmitter and receiver are rechargeable. The receiver is waterproof and dustproof.4. Reflective fluorescent TPU collar, improve the safety at night.5. Use with silicone sleeve to prevent pets from directly touching the metal.

Wirele pet fence mode:1. No Need pairing between nsmitter and receiver，it can work directly after power on;2. One nsmitter can connect up to 5 receivers in fence mode.Remote control dog ining mode:1. Pair the code：Can control 3 dogs same time, 1 for 1st dog, 2 for 2nd dog, 3 for 3rd dog. you can see the method in “How to pairing nsmitter and Receiver”，2. 3 function: Sound, ion, Shock in ining mode.3. ion and shock feature has a 1-3 level. The lower number indicates weaker, the larger the number, the stronger the  ntensity, please pre “+” or “-” to adjust.

How to Test:Before using please fully charged and use method of 1+2 below to confirm itworking or not (Shock test need use the LED Test Light Tool).1. After Power on the nsmitter and Receiver, then power off the nsmitter, the receiver will launch bi-bi-bi always.2. In the ining mode, pre “Beep, ion or Shock” on to test.

Working Prince:1. Receiver will not work among setting distance, will work as below when exceed the range.2. When dog not in the range, Receiver working modes as below: 1--2--3(indicator light fing)1). Sound 5 seconds,; 2). ion 5 seconds; 3). Sound& ion at same time for 6 seconds.4). Shock 5 seconds; 5). Sound& Shock at same time for 6 seconds3. After 5 working modes, it will launch di-di-di sound always. The receiver will not workuntil the dog return to the setting distance range or pre power Off.4. After 5 minutes of static, it will enter standby mode.5. After the second no signal 5 second delay work.

Function Operation:1. When “100/200/300/500/990” displayed on screen, it is in wirele fence mode. pre MODE on switch to dog ining mode, in dog ining mode, LED display “001”，“002” or “003” means for 1,2,3 dogs. Sound function display 1; ion and shock function 1-2-3 Level can adjust different strengths.2. In dog ining mode can remote control 3 dogs at same time, pre ‘+’ or ‘-’on to change control which dog. There are 3 functions on the right of the panel: sound, ion, shock.

Wirele fence using guide:1. Support 5 dogs in maximum, the biest sight line radius is 990ft, wirele fence and as center of the nsmitter.2. When dog exceed the setting range, receiver will start working modeautomatically. (refer to the working modes at “Working Prince” ).3. Please keep the nsmitter always power on, if not, After 2 cycles of working modes,it will launch di-di-di sound always.

Dog ining using guide:1. The biest sight line distance is about 990ft for dog ining collar.2. 3 dogs can be remote controlled mean while, LED display “001”Means the firstdog, “002”for the second dog,“003”for the third dog，3. Independent “sound”，“ion”，and“shock”3 function for options. The ion and shock functions have 1-3 Level  djustments, and pre “+” “-” to adjust. ion” and “Electric Shock” The greater the number, the stronger the intensity.

How to pairing nsmitter and Receiver1. Fully charge and power on;2. Pre "+" or "-" to choice paring which Receiver (001,002 or 003) ;3. Pre nsmitter panel “MODE” on for 3 seconds until the LED fing,then pre the receiver power on for 3 seconds, after pairing succefully,LED and receiver indicator light will be on always.4. Use test method to test is connected or not ; (please see “How to Test”)

Receiver using guide1. Receiver is water proof and rechargeable, the metal probes can be repd according to dog’s hair length. Receiver static for 5 minutes, to sleep. Touch or move the receiver , it will be awakened.2. Pre power on 1 second, receive will be turned on, power light will be onalways, Pre power on gently, receiver will be turned off.3. LED testing light used for testining, testing light on means shocking function is working.can be used as wrench to fix metal probes.

Charging:1. nsmitter is rechargeable with DC 5V, 2500mah lithium battery, LED will display 000 fing When low battery, please charge in time, usually 4-5 hours for full charge. After full charge, the red light will be on always, please use the charger.2. Receiver is rechargeable with 5V 400mah lithium battery, taking 2-3 hours for full charge and then be used for about 500 times. Receiver 5V low battery reminder: indicator light fing, please charge in time, after fully charged, the green light will be on.

Low battery alert:Indicating red light fing, please charge in time.

Attention:It will affect distance and using when low power.Emitters should be pd outdoors to avoid affecting the distance, low power will affect the use of distancePlease keep the nsmitter always power on, if not, the receiver will go to working mode, shock your dogs two times, and bi-bi-bi always.The pack has been paired at the factory. If you purchase additional collars, the dog ining equipment must be paired before use.