Car Door Edge Protection Guards Trim Strip Decoration Sticker For Toyota Corolla Camry Yaris Rav4 Chr Sienna Prius Accessories

[xlmodel]-[photo]-[0000]

(1)-Measure the length of the door (measure twice and cut once)

(2)-Cut the door guard plate to the length just measured

(3)-Slide the door guard into the door

(4)-Repeat the above proce for each door.

installation method:

1. Expose the decorative strip to the sun for about 3-5 minutes (this step makes the decorative strip more flexible)

2. Gently p the door edge guard on the door to gn it with the outline of the door

3. Measure the length of the door edge and cut the door edge to the length just measured

4. Slide the side of the door into the entrance

5. Make sure that the edge of the door is in the correct position.

When you tap, the protective cover will slowly bend to the correct position. Once installed in p, do not remove, reposition or reinstall the door edge guard, otherwise it will not be securely fixed. After the entire guard is in p, you can tap it slightly harder to ensure a firm fit