Charging Dock Station Charger With LED Indication For Nintendo Switch Joy-Con
Delivery & Returns
Shipped from abroad
Choose your location
14 days free return (except for underwear and personal items) up to 30 days for defective products with necessity for requesting a return within 24 hours from the delivery date.See more
Order Fulfillment Rate: Excellent
Quality Score: Excellent
Charging Dock Station Charger
with LED indication For Nintendo Switch Joy-Con
- This is a
dedicated charging stand for charging the Switch Joy-Con controller. Four
controllers (two "-", two "+") can be charged at the same time, powered by a
5V DC power supply, with a two-color LED indicating the operating status of
the charging cradle. This product is beautiful and practical, plug and play,
easy to operate and simple.
the USB power cable to the USB power supply to supply power to the charger.
the controller into the card slot of the charging stand to charge
- When power
is on, if there are 3 to 4 handles connected to the charging stand, then
each handle will be powered for 1.5 seconds in turn. After all the handles
complete this action, two of the handles will be charged.
- The handle
is connected, the red LED is long bright; the battery is fully charged, the
green LED is long; no charging, all LEDs are off.
most two handles are charged at the same time, and the charging current of
each handle is about 200ma.
- The maximum
current allowed to pass through each charging port is 400ma. If it exceeds
400ma, the charging port will be over-current protected, the red LED will
flash quickly, and the over-current state will be restored after the handle
is pulled out.
turn charging: two combination charging, switching time is 10 minutes. For
example, the last time the 1/2 handle is charged, the next 3/4 handle is
charged. After the handle of the corresponding position is fully charged,
the power is continuously supplied and the power supply continues.
pressure overvoltage mode: red LED slow flash.
- The voltage
is lower than 4.2v and enters the low voltage mode. The voltage is greater
than 4.7v and returns to normal.
- The voltage
is higher than 5.6v and enters the overvoltage mode. The voltage is less
than 5.3v and returns to normal.
charging: In theory, the handle can be fully charged after charging for
about 3 hours. If the handle is connected to the charging stand and the
battery is not fully charged after 4.5 hours of charging, the green LED is
- red and
green LED conversion conditions:
- The handle
is connected, the red LED is long; the detected current is less than 30~45mA
for 30 seconds, then the handle is fully charged, the green LED is long;
after the handle is disconnected, the green LED is extinguished;
- Re-plug the
fully charged handle, at least wait for more than 30 seconds, the red LED
will switch to the green LED)
- 1x Joy-Con
Charger (not include the console)
- high quality
- Soft, light and durable material
- Unique design
- Smooth texture and comfortable handle
- Low price
- SKU: GE810EL0ZSE9PNAFAMZ
- Color: N/A
This product has no ratings yet.