product_image_name-Generic-JCD Adjustable Temperature Electric Iron Heater 220V 110V 60W Ceramic Internal Heating For 908 Solder Iron 110V 60W-1product_image_name-Generic-JCD Adjustable Temperature Electric Iron Heater 220V 110V 60W Ceramic Internal Heating For 908 Solder Iron 110V 60W-2product_image_name-Generic-JCD Adjustable Temperature Electric Iron Heater 220V 110V 60W Ceramic Internal Heating For 908 Solder Iron 110V 60W-3

مشاركة هذا المنتج

مرسل من خارج البلاد

JCD Adjustable Temperature Electric Iron Heater 220V 110V 60W Ceramic Internal Heating For 908 Solder Iron 110V 60W

جنيه 1,879.86
جنيه 3,571.6247%

In stock

مصاريف الشحن تبدأ من جنيه 598.96 الي 6 اكتوبر وفر ١٠ جنيه على مصاريف الشحن عند الدفع مسبقا
اختار خيارات أخري

عروض

التوصيل والارجاع

تم شحنه من الخارج 

اختار العنوان

توصيل للمنزل

مصاريف الشحن جنيه 598.96
يتم التوصيل يوم ‎ ١٧ يونيو‎ عند الطلب خلال ‎10hrs 34mins

سياسة الارجاع

يمكنك ارجاع اغلب المنتجات خلال 14-30 يوم من تاريخ الشراء، مع ضرورة الإبلاغ عن وجود اي عيب ظاهر في خلال 48 ساعة، للإستثناءات والشروط راجع سياسة الإرجاع من هنا.تفاصيل

بيانات البائع

frmryp

60%تقييم البائع

كن أول المتابعين

تابع

أداء البائع

معدل سرعه توصيل الطلب: ممتاز

مواصفات المنتج


Preparation:
1. Always keep the tip of the bit clean, ensure to coat the bit liberally with solder the first time the iron is switched on. Note: Initial tinning is done in order to extend the life of the bit.2. Wet the provided sponge prior to using.3. Check that the solder wire is ready for use and adequately extended from the case in step 1 in the above illustration below.4. Ensure that the bit fits snugly and has adequate contact with the internal .

How to change/replace bits:
1. After turning the iron on, the bit will commence heating and will be ready for use when the solder wire begins to melt at contact.2. Initiate by ensuring the melted solder makes a clean connection between the contacts that you attempting to solder.3. Move the solder wire and iron away once enough solder is placed and wipe any residual solder using the wet sponge.4. Always remember to switch the iron off at the mains and place it in the provided holder while it cools enough to be stored safely.
Notes:1. Use safety and take necessary precautions to avoid injury or .2. The iron heats up quickly. Select a suitable temperature to operate at. Using the iron for long hours and at high temp may shorten the life of the product.3. Make sure to switch the iron on when required and switch it off when not, in order to reduce the risk of injury and .4. Clean the tip ever so often to extend its life. Avoid using chemicals and surfaces as this could damage the metallic surface.5. The provided bits are 900M series and spares are available from where you purchased this product.
Package Included:
1 xJCD Adjustable Temperature Electric Iron Heater

{images}
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
image
image

المواصفات

المواصفات الرئيسية

1. After turning the iron on, the bit will commence heating and will be ready for use when the solder wire begins to melt at contact.2. Initiate by ensuring the melted solder makes a clean connection between the contacts that you attempting to solder. 3. Move the solder wire and iron away once enough solder is placed and wipe any residual solder using the wet sponge.4. Always remember to switch the iron off at the mains and place it in the provided holder while it cools enough to be stored safely.

  • Easy to use
  • Exquisite Workmanship
  • Well Made
  • Best Choice and best discounts
  • Customer Care is Our Top Priority
  • Offer is Subject to Availability
  • Big Sale

محتويات العبوه

1 x JCD Adjustable Temperature Electric Iron Heater

المواصفات

  • SKU: GE810IP1F3OSLNAFAMZ
  • خط الإنتاج: Fouani Nigeria
  • الموديل: JMVANJIA6985716
  • بلد الصنع: China
  • الحجم (طولx عرضx ارتفاع سم): 10 x 6 x 1
  • اللون: multicolor
  • الخامه الرئيسية: 1
  • نوع المتجر: Jumia Mall/Food

آراء العملاء الموثقة

لم يتم تقييم المنتج بعد

JCD Adjustable Temperature Electric Iron Heater 220V 110V 60W Ceramic Internal Heating For 908 Solder Iron 110V 60W

JCD Adjustable Temperature Electric Iron Heater 220V 110V 60W Ceramic Internal Heating For 908 Solder Iron 110V 60W

جنيه 1,879.86
جنيه 3,571.6247%

المنتجات التي تمت مشاهدتها مؤخرًا

عرض الكل