Blink Led Tv Backlight Tester

LED Strip Lamp Tester TV Backlight Tester Meter 0-230V Output Measuring Tool LED Strip Lamp Bead Tester Current Tester

Multi-function LED Bead Maintenance Tester

4-speed adjustable, dual digital display, high power

Electrical test, buzzer reminder

Specifications:

Product name: LED Bead Maintenance Tester

Material: Plastic

Power supply voltage: 220V AC

Input voltage: AC85-265V 50Hz

Output voltage: 0-240V high voltage

Product size: 140mm x 82mm x 60mm

Features:

Any light source: Test any COB light source of LED strip light board, single light bead, etc.

Non-removable screen: Test non-removable screen of LED TV backlight and other LED backlight of any size

Voltage test: Test voltage parameters of various components, including voltage stability and voltage tolerance values

DC voltage: Test voltage value DC power supply (within 300V), which can be used as a DC voltmeter

Ultra-high voltage: 30% higher brightness than similar high-brightness versions on the market

Test circuit: continuity and circuit leakage test

Product advantages:

1. Suitable for single LED beads, LED driving, LED panel and integrated optical LED

2. Support capacitance voltage and diode voltage test

3. No need to disassemble the board to test LED backlights

4. Safe protection: double welded

5.Brun protection: voltage and current intelligent adjustment

6. Safety design: slow boost, soft start. Current increases steadily

Application method:

1. Connect the power, and the start will cost about 3 to 5 seconds

2. Soft start mode makes the backlight gradually brighter

3. If you can't confirm the "+" and "-", do not test for a long time

4. Do not touch the output end of the probes for a long time

5. Rust-proof materials Double insulation design makes the tester safe with high strength Flame

6. If the backlight voltage of the tested LED TV is 000, it means a short circuit, and if the voltage is 320, it means an open circuit. The voltage of each lamp in the TV must be the same, and it is not suitable for LED light strip.

Precautions:

1. Do not look directly at the LED light source for a long time to check and maintain to avoid eye injury.

2. If it is not used for a long time, please unplug the power switch to avoid accidents and prolong the service life.

3. Try to avoid touching the end of the test line to avoid electric shock