Esp esp32 module display 2.8

Product specifications:
Product Name: ESP32 WiFi+BT Dual Mode Development Board Display
Display colour: RGB 65K colours.
Specifications: With casing/without housing (optional)
Dimensions: 2.8 inches.
Type: TFT
Driver chip: ILI9341.
Resolution: 320 x 240.
Visible area: 43.2 x 57.6 mm.
Viewing angle: >60°.
Operating temperature: -20 to 70 °C.
Operating voltage: 5 V.
Power Consumption: 115mA
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
WiFi: 802.11b/g/n/
Supported interfaces: UART, SPI, SDIO, I2C, IR, ADC, DAC, PWM
I/O ports: 22
Serial interface rate: Standard 115200 bps
Spectrum Range: 2412-2484MHz
Antenna type: Built-in PCB antenna, 2 dBi gain
Security: WPA/WPA2/WPA2-Enterprise/WPS
Transmission power:
802.11b: 17±2dBm (@11Mbps)
802.11b: 14±2dBm (@54Mbps)
802.11b: 13±2dBm (@MC57)
Interface sensitivity:
CCK, 1 Mbps: -90 dBm.
CCK, 11 Mbps: -85 dBm.
6 Mbps (1/2BPSK): -88 dBm
54 Mbps (3/464-QAM): -70 dBm.
MCS7 (65 Mbps, 72.2 Mbps): -67 dBm
Packing list
1 x screen.
1 x stylus pen.
1 x TYPE-C data cable.
1 x 4-pin connector for DuPont cable.