FURONG Fiber Optic Splice Sleeves 6CM Heat Shrinks Tubing Protection Tubes 2.6mx60m 100 PCS

Product Features
100PCS x Fiber Splice Tubes (1 packages)
Outer Diameter:2.6mm
Length:60mm
Steel Rod Dia:1mm
Weight:75g 
Material: Polyolefin, Stainless Steel
Operating temperature:-45°C to+100°C
Minimum fully recovery temperature:120°C
Standard color: Clear, Silver Tone

High-quality fiber splice protector sleeves, Stiffness of connection and quickness of assembly are the basic advantages of this solution. Heat Shrinkable Tube consists of transparent heat shrinkable casing(Outer tube), clear hot melt tube(inner tube) and 304 stainless steel rod(reinforcing rib), it is specially designed for optical fiber fusion within 0.7 mm protection components.

Specification,
1. The sealing structure makes the splice free from the effect of temperature and humidity from the environment, avoid any damages to the optical fiber during installation.
2. Does not affect the optical properties of photoconductivity, protect splice position, enhancing mechanical strength.
3. Smooth, deburred stainless steel reinforcing member ends decrease the risk of fiber damage during installation.
4. Single holed(preshrunk)ends eliminates improper fiber threading, Extended liner length prevents contact between the fiber and the backbone.

Easy to Use
1. Transparent Clear sleeve make it easy to detect splice before shrinkage heating, Airproof structure keeping the splice point's good resistance of humidity and temperature.
2. Moisture resistant: Strength member is made from "Full hard" stainless steel of 304 grade to avoid rupturing during shrinking, 304 grade gives better corrosion resistance, even in the coastal environment. Resistant to heat shocks, no cracking dripping or flowing.