3B SMART KEY motor disconnect device

3B SMART KEY motor disconnect device
A temperature sensor disconnects the motor when the water temperature inside the motor rises to a certain degree. It has a copper column that conducts heat quickly, and it has a dial to control the degree of separation from 0 to 60 degrees Celsius. It protects the motor from damage.

SECURITY

Auto-arm
After ignition off, it will be automatically system armed.

The unique identification
The unique data will be written into the smart card, and it is not allowed to be amended to ensure the possibility of unique identification.

The concealed sensing place
The sensing antenna is installed in a concealed place.

Everlasting smart card
No need for a battery inside the card and static-current proof to ensure the everlasting of the smart card.

Anti code scanning
The valid sensing distance is less than 5 cm to avoid code scanning to decode the system.

FEATURES

Disarm
When the legal owner with the identification card closes to the sensor, the buzzer will "Di Di" twice continuously to indicate the system disarmed. The LED indicator will be off and the car can be operated normally.

Auto-arm
After the system is disarmed, the car engine must be started within 25 seconds. For security, the system will "Di" once to enter arm status again in 25 seconds. Then the system should be disarmed again to start the car engine.

Power off memory
When power off and on again, no matter how long it lasts, the system will automatically restore to the status before power off.

Trigger alarming
In arm, if the system is triggered such as ignition started illegally, after 8 seconds the buzzer will beep and the LED indicator will flash quickly until the system is disarmed or no trigger again after beep 30 seconds.

Master code matching
Press the code learning switch, the LED indicator will turn on for 10 seconds, put the card close to the sensor, then "Di" once to indicate code matching successfully. Only one master card can match the code.