Straight Connector 16mm (Pack Of 50)

Features:
SIMPLE TO INSTALL. Secure and easy installation without glue, tools, or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak. If desired you may use a heat gun or blow dryer to soften the end of the tubing before inserting.Straight Couplings ConnectorFits all major brands of tubing 1/2", 16mm - 
*PLEASE NOTE* - To prevent leaks or blowouts please ensure that the incoming pressure does not exceed 30PSI. These fittings are designed to fit 1/2" Inch, 16mm drip tubing , if the tubing you are using is larger it can cause leaks! 99% of all leaks and blowouts are caused by pressure issues or tubing size issues.

• Details: Every drip irrigation system depends on reliable, leak-free connection fittings to keep the system together. Your Piece Straight Couplings - (Create two-way connections of poly tubing or drip line). Product Specifications: For connecting emitter line and polyethylene tubing Use with 16mm emitter line and distribution tubing. One-piece construction UV resistant high impact plastic Secure and easy installation without glue or clamps Operating pressure: up to 30 PSI Installation Tips: Push the tubing as far ver the barbed ends as possible. It should be a very secure fit. It should be nearly impossible (relatively speaking) to pull the tubing back off by hand. It is recommended to let the tubing heat up in the sun before installation to soften and make it more maneuverable. If your system runs at a high PSI (over 25psi) you may want to consider regulating pressure or using clamps over the fittings to be sure you will not have any blowouts or leaking issues. Easy Install - Use these durable irrigation fittings to your connect 1/2" drip irrigation tubing. piece - Couplings - (Create two-way connections of poly tubing or drip line). - High Impact Plastic Construction