Ready for pickup between 21 April and 23 April if you place your order within the next 19hrs 24mins
Door Delivery
Delivery Fees EGP 25.00
Ready for delivery between 21 April and 23 April if you place your order within the next 19hrs 24mins
Return Policy
You can return your item for free within 14 days of delivery if it is eligible. Any visible defects must be reported within 48 hours. Check our return policy forDetails
The Automobile Shakes Hands And Protects The Membrane is a set of 5 high-quality car paint protection films designed to safeguard your vehicle's exterior against scratches and damage. This scratch-resistant film features high viscosity adhesive for easy application and ensures no residue is left behind upon removal.
Benefits of The Automobile Shakes Hands And Protects The Membrane
Prevents Scratches: Protects paint from scratches and damage.
No Residue: Removes without leaving traces behind.
High Durability: Strong abrasion resistance and high-temperature protection.
Easy to Use: Simple application process with clear instructions.
How to Apply
1. Clean the handle area; for scratched surfaces, apply a concave surface treatment with sandpaper before use for better results.
2. Use a spray bottle to apply a small amount of clean water evenly on both the facing surface and the concave surface of the handle.
3. Position the rubber surface, sliding it up, down, left, and right to adjust it to the right position.
4. Press the middle surface with two thumbs to push outward, gradually squeezing out any water.
5. If there are bubbles or breaks, use a low-temperature hot air blower to heat the area while flattening it.
6. Firmly press the middle surface to push it down and squeeze out any remaining water. For any issues, apply hot air as needed.
Specifications
Key Features
1- Please clean the handle interview (for the scratched, more protection is needed, please add the concave surface with sand gift before use, treatment, the effect will be better)
2- The base paper of the technical product, use the spray with clean water. For practical purposes, spray a small amount of water evenly on the facing surface and the concave surface of the handle.
3- let the rubber surface glue, slide up and down, left and right, adjust, just right position.
4- press the middle surface with two thumbs, into the word "one" gradually to both sides. Push forward, squeeze out the water.
5- fingers press the middle surface to push up, gradually squeeze out, if there is training or phase break, use a hot air blower (low temperature) to heat. At the same time, it can be flattened.
6- Press the middle surface tightly with your fingers to push it down, and gradually squeeze out the water. In case of wing or broken phase, add it with a hot air blower (low temperature range). Hot water hot air stick hot air stick So Bentley.
تحت التجربة ولكن خطوات اللصق غير واضحة وهى سهلة التركيب . رش ببخاخة مياه على ضهر الاستيكر وعلى ضهر المقبض وبعدها ظبط الاستيكر على المكان وبصوابعك اضغط المياه الزيادة من تحت الاستيكر .