Legrand PIR Motion Sensor

This device enables a light source to be controlled automatically by
detecting movement in the monitoring area.
Using infrared (IR) technology, this motion sensor has a 360° detection
angle and, when positioned 2.50 m above the ground,
an 8 m diameter detection area. It is installed on false ceiling (0 489
41/44 or surface ceiling (0 489 48). It is quick and easy to set, using
potentiometers. The light level threshold can vary from 10 to 1275 lux
and the time delay from 10 seconds to 10 minutes.

Technical Data
Voltage: 240 V~
Frequency: 50/60 Hz
Consumption on standby: 0.75 W
Output via normally open contact connected to the phase
Wiring: 1 x 2.5 mm2/2 x 1.5 mm2
Number of terminals: 3
Type of terminal: screw
Drilling diameter for installation in false ceiling: 65 mm
Weight: 71 g
Impact resistance: IK04