Soldering Iron - 60W - 220v

When the power is on the tip temperature can reach over 300 C ( 572 ° F ) . Since mishan dling may lead to burns or fire , be sure to comply with the following precautions . Do not touch the tip and the metallic parts near the tip .
• Do not use the product near flammable items .
• Turn the power off when not in use the unit .
• Do not warm up the soldering iron with the tip pointing down . Do not use the unit for applications other than soldering .Do not wet the unit or use the unit when your hands are wet Do not modify the unit . Use only genuine HAKKO replacement parts . Do not shock the unit , or otherwise subject the heating element to severe damage . The soldering process will produee smoke , so make sure the area is well ventilated .
How to solder
1. Heat the part with the soldering tip .
2. Apply rosin - based solder to the part and melt it with the soldering tip .
3. Wait for the solder to cool and harden before moving the soldered part .
Note
• Remove residual solder or any dirt with a moistened duster or the tip cleaner .
• Coat the tip fresh solder after use . . Before replacing the parts , turn the power off and allow the unit to cool to room temperature .
• The first time you use the soldering iron , it may smoke slightly as the heating element dries out . This is normal and should only last for approx . 10 minutes .
• Clean the parts to be joined .
• Clean soldering leon tip abd in all faces of tip with a coating of sol : der Heat the part where to be soldered
• Apply flux - cored solder to heated part ( not the soldering tip ) and heat it till solder melts and flows freelu .