This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeElectronicsHome AudioStereo System ComponentsCD & Tape PlayersCD PlayersTPA3221 Digital Power Amplifier Board 100Wx2 Stereo DC 19V-3
EGP 2,608.13
EGP 4,955.5047%
2 units left
Delivery fees from EGP 782.44 to 6th of October.
Save 10 EGP on shipping with prepaid payment
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees EGP 782.44
Pickup by 04 June when you order within next 3hrs 15mins
Door Delivery
Delivery Fees EGP 817.44
Delivery by 04 June when you order within next 3hrs 15mins
Return Policy
Free return within the legal return period from 14 to 30 days, and if they meet the terms & conditions, with the need to report any apparent defect within 48 hours. For more details about return policy.Details
Warranty
None
Seller Information
JG-Nehami
60%Seller Score
21 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Excellent
Customer Rating: Good
Product details
TPA3221 is a high-power Class D amplifier that can achieve high-efficiency operation in full power, idle and standby states.
The device uses closed-loop feedback with a bandwidth of up to 100kHz to low distortion in the audio frequency band and achieve quality.
The device operates with AD or low idle current HEAD (high-efficiency AD mode) modulation and can 2 x 105W power for a 4Ω load or 1 x 208W power for a 2Ω load.
Integrated Protection: Undervoltage, Overvoltage, -by- Current Limit, Short Circuit, Clipping Detection, Overtemperature Warning andShutdown, and DC Speaker Protection
90% Efficient Class-D Operation (4 Ω). Pin-Compatible Family of Devices with Voltageand Power-Level Stereo (2 x BTL) and Mono (1 x PBTL) Operation
Output Power at 10% +N:
1. 105-W Stereo into 4 Ω in BTL Configuration
2. 112-W Stereo into 3 Ω in BTL Configuration
3. 208-W Mono into 2 Ω in PBTL Configuration
Output Power at 1% +N:
1. 88-W Stereo into 4 Ω in BTL Configuration
2. 100-W Stereo into 3 Ω in BTL Configuration
3. 170-W Mono into 2 Ω in PBTL Configuration
5-V Gate Drive or Built-in LDO for Optional Single-Supply Operation
Closed-Loop Feedback Design:
1. Signal Bandwidth up to 100 kHz for High-Frequency Content From HD Sources
2. 0.02% +N at 1 W into 4 Ω
3. 60-dB PSRR (BTL, No Input Signal)
4. Less than 75-μV Output Noise (A-Weighted)
5. 108-dB (A-Weighted)
6. AD or HEAD Modulation Schemes
Low-Power Operating Modes:
1. Standby Modes: Mute and Less than 1 mA Shutdown
2. Low Idle-Current HEAD Modulation Scheme
3. Single-Channel BTL Operation
Multiple Input to Simplify -Amp Design:
1. Differential or Single-Ended Analog Inputs
2. Selectable Gains: 18 dB, 24 dB, 30 dB, 34 dB
Working voltage: DC19V-30V, DC24V is recommended
Size: 103 x 78MM
Maximum Power Per Channel: 100W
Model Number: TPA3221 Digital Class D HIFI Audio Amplifier Board
color:Photo color
Material:plastic Package Contents:
1 x Digital Power Amplifier Board Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
The device uses closed-loop feedback with a bandwidth of up to 100kHz to low distortion in the audio frequency band and achieve quality.
The device operates with AD or low idle current HEAD (high-efficiency AD mode) modulation and can 2 x 105W power for a 4Ω load or 1 x 208W power for a 2Ω load.
Integrated Protection: Undervoltage, Overvoltage, -by- Current Limit, Short Circuit, Clipping Detection, Overtemperature Warning andShutdown, and DC Speaker Protection
90% Efficient Class-D Operation (4 Ω). Pin-Compatible Family of Devices with Voltageand Power-Level Stereo (2 x BTL) and Mono (1 x PBTL) Operation
Output Power at 10% +N:
1. 105-W Stereo into 4 Ω in BTL Configuration
2. 112-W Stereo into 3 Ω in BTL Configuration
3. 208-W Mono into 2 Ω in PBTL Configuration
Output Power at 1% +N:
1. 88-W Stereo into 4 Ω in BTL Configuration
2. 100-W Stereo into 3 Ω in BTL Configuration
3. 170-W Mono into 2 Ω in PBTL Configuration
5-V Gate Drive or Built-in LDO for Optional Single-Supply Operation
Closed-Loop Feedback Design:
1. Signal Bandwidth up to 100 kHz for High-Frequency Content From HD Sources
2. 0.02% +N at 1 W into 4 Ω
3. 60-dB PSRR (BTL, No Input Signal)
4. Less than 75-μV Output Noise (A-Weighted)
5. 108-dB (A-Weighted)
6. AD or HEAD Modulation Schemes
Low-Power Operating Modes:
1. Standby Modes: Mute and Less than 1 mA Shutdown
2. Low Idle-Current HEAD Modulation Scheme
3. Single-Channel BTL Operation
Multiple Input to Simplify -Amp Design:
1. Differential or Single-Ended Analog Inputs
2. Selectable Gains: 18 dB, 24 dB, 30 dB, 34 dB
Working voltage: DC19V-30V, DC24V is recommended
Size: 103 x 78MM
Maximum Power Per Channel: 100W
Model Number: TPA3221 Digital Class D HIFI Audio Amplifier Board
color:Photo color
Material:plastic Package Contents:
1 x Digital Power Amplifier Board Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
- Durable and good quality
- Digital power amplifier board
- power amplifier board
- Audio Amplifier Board
- Amplifier Board
- TPA3221 Amplifier Board
- The details are as described above
What’s in the box
1 x Digital Power Amplifier Board
Specifications
- SKU: BR830EA0SFGBENAFAMZ
- Model: Digital power amplifier board
- Production Country: China
- Size (L x W x H cm): 12x8x2
- Color: multicolor
- Main Material: plastic
- Warranty Address: None
Verified Customer Feedback
This product has no ratings yet.
915 Generation TPA3221 Digital Power Amplifier Board 100Wx2 Stereo DC 19V-3
EGP 2,608.13
EGP 4,955.5047%