APC Easy UPS Line-interactive SMV 1000VA 230V- Schuko Outlet

Key Features

Output power capacity

700 Watts / 1.0kVA

Output Connections

(4) Schuko CEE 7 (Battery Backup)

Nominal Output Voltage

230V

Nominal Input Voltage

230V

Input Connections

IEC 60320 C14

• Automatic Voltage Regulation (AVR)

  Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

• Cold-start capable

  Provides temporary battery power when the utility power is out.

• LCD graphics display

  Text and mimic diagrams that display modes of operation, system parameters and alarms.

• Pure sine wave output on battery

  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Easy UPS Features & Benefits

Safety

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Availability

Advanced Safety Features

Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps and battery damage due to low voltage situations.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Features

Boost Automatic Voltage Regulation (AVR)

Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Transformer-block spaced outlets

Protect equipment with input transformer blocks without blocking access to other receptacles.

Sleek design

Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up and complement home décor.

Cold-start capable

Provides temporary battery power when the utility power is out.

Manageability

Audible alarms

Provides notification of changing utility power and UPS power conditions

LED Indicators

Provide easy-to-read status of the unit and utility power conditions.

Protection

Battery backup and surge protection

Outlets provide abundant runtime for network gateway equipment and other critical low-power devices, allowing for hours of internet access during a power outage.

Battery and surge protected outlets

Back up and protect your hardware and data during power outages, surges and spikes .

Technical Specifications

Output

• Max Configurable Power (Watts): 700 Watts / 1.0kVA
• Output Frequency (sync to mains): 50/60 Hz +/- 1 Hz Unsynchronised
• Load Crest Factor: 3 : 1
• Topology: Line interactive
• Waveform type: Sine wave
• Transfer Time: 2-6 ms typical : 12 ms maximum

Input

• Input frequency: 45 - 65 Hz Auto-sensing
• Input voltage range for main operations: 165 - 290V
• Number of Power Cords: 1
• Other Input Voltages: 220 V, 240 V
   

Batteries & Runtime

• Battery type: Lead-acid battery
• Typical recharge time: 4hour(s)
• Nominal Battery Voltage: 24 V
• Expected Battery Life (years): 3 - 5
• Battery Charge Power (Watts): 37 Watts
• Battery Volt-Amp-Hour Capacity: 168

Communications & Management

• Interface Port(s): USB
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge Protection and Filtering

• Surge energy rating: 190Joules

Physical

• Maximum Height:  22.0CM
• Maximum Width:  16.0CM
• Maximum Depth:  41.0CM
• Net Weight: 13.6KG
• Color: Black

Environmental

• Operating Temperature: 0 - 40 °C
• Operating Relative Humidity: 0 - 95 (Non-condensing) %
• Operating Elevation: 0 - 3000meters
• Storage Temperature: -10 - 40 °C
• Storage Relative Humidity: 0 - 95 (Non-condensing) %
• Storage Elevation: 0 - 15000meters
• Audible noise at 1 meter from surface of unit: 45.0dBA
• Protection Class: IP20