Carbon Fiber Strip For Door Sill To Protect From Shock - 250cm

Made of rubber material, a high-quality protective layer, anti-scratch, protects the trunk door sill from scratches, and can also be used as a general way of protection on all sides of the vehicle, such as bumpers, tire, side and front and back fenders, etc. The bending freely can be proportional to the bending of the car and the protection of the trunk is anti-scratch Scratch-resistant with non-destructive installation of the car body in general. Protect the bumper from rubbing and breaking the paint, making the car more beautiful. High quality auto tape will not be affected by wet or cold weather and will easily withstand all kinds of weather, car wash and high speeds. The carbon flange is easy to bend and matches the bumper shape, easy to install and has good adhesion. Universal front flange for most cars, trucks and SUVs with an easy-to-use 2.5m car tape. Protect the front of the car from the bottom, anti-scratch and decoration while protecting your car from blows and bumps
Installation method:1. Convenient installation The length can be adjusted to the best position for your car.2. Clean the bottom of the bumper preferably with alcohol to fix the lip, ensuring a strong combination with the bumper cover.3. Then remove the double-sided tape and attach it to the front bumper lip. The degree of adhesion (adhesion or screw) can be determined. To achieve a better adhesion effect we recommend using the screw and nails in the package.4. Install at the bottom of the bumper with full rotation from first to last.5. Quick and easy way to add front bumper blades is almost any aggression on the vehicle and reduce the appearance of flexible and durable materials, the rubber carbon fiber design allows you to install the bottom bumper (the front lip of the car should be equipped with a self-tapping screw, it is installed due to the fact that the motor drive vibration wave Relatively large, the screw will make (bumper spacer / spoiler plate) stronger and will not fall off, cut off the excess using scissors. (Note: Do not clean your car within 48 hours, glue must be installed after 12 hours)