3-1PC Sewing Machines Feet DIY Manual Stitch work Machine for Outdoor Travel Clothes Fabrics Sewing Kit

U.S. buyer attention:The areas where the US warehouse does not deliver goods are: Hawaii, Alaska, Puerto Rico, Guam and other US overseas territories. And the military addre. But you can choose ship from China.Spanish buyers attention:If your addre includes following postal code please do not choose the Spanish warehouse.The zip code starts with 35/38.Overseas warehouse cannot be delivered. But you can choose ship from China

Mini Sewing Machines Portable work Hand-Held Devices Quick Repairs DIY Clothes Household Crafting Mending Handwork Tools AcceoriesSpecification:Material: ABSSize specification: 11 x 7 x 4.5cm/4.33 x 2.76 x 1.77inPacking method: color boxColor: Red, Blue, Pink, WhiteInstructions:1. Hold the machine: Hold the machine base with four fingers of your right hand, and p your thumb on the top of the top cover of the machine naturally to hold the machine steadily.2. Threading: Pull out the thread on the spool gently. Pa the lead loop again. P the threaded thread next to the , and put the threader through the hole from the front of the (toward the body joint), and then introduce the thread into the small hole of the threader, exit the threader and pull out the head thread for about 2 -3 cm, pre the line plate to be ready for use.3. Put the cloth: use the index finger of your right hand to lift the preure plate, put the ready-to-sew fabric (thickne no more than 0 mm) under the preure plate, and gently put the preure plate back to pre the fabric.4. Sewing operation: hold the fabric with the left hand, pre the top of the upper cover gently and quickly with the thumb of the right hand, pre down again with the thumb, and repeat the proce, the cloth feeding mechanism will automatically send the sewing material to the left. Hold the right hand of the machine and gradually move it to the right, and gently move the sewing object to the left in accordance with the sewing rhythm in the left hand until the sewing ends; cut the thread with sciors, and gently pull up the preure plate to take out the fabric. Pull out the last section of thread from the back of the fabric to be sewn, make it pa into the next section of loops, tighten and tie a knot, the stitches will be firm; do not pull the fabric to break the thread at the end of sewing head, so as not to damage the s and pins of the machine.5. This machine can automatically feed the cloth and adjust the tightne between the stitches, but it is neceary to pay attention to the following points: if the stitches are too tight, adjust the preure nut slightly counterclockwise; if the stitches are too loose, adjust the preure nut slightly clockwise; tie the correct stitches tightly. If you need larger stitches, you can use the left hand to pull the cloth a little faster. If the stitches are denser, the left hand pull cloth can be slightly slower.6. Change the thread group: If you change to a large thread group, you can connect the spare extension rod to the spool shaft and sleeve it into the large thread group. P the spare plastic cap at the end of the rod to fix the large thread ball, then rethread the thread, adjust the tension of the thread and sew; use cotton thread or synthetic thread for the best effect.7. Change the : loosen the fixing screw and take out the broken . Install the new as shown, and pay attention to the flat surface of the and the fixing screw, not reverse. Pocket size, manual operation, this sewing machine has the function of automatically feeding cloth and adjusting the tightne between the stitches to achieve profeional results; the product adopts exquisite color gift packaging, in addition to being ideal for family daily use, it is also suitable for gifts and conference gifts, etc.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.1 x Mini Sewing Machine