915 Generation 14.4V-18V Charger DC18WA for Maktec DC18SG DC1851 (EU Plug)

1. - batteries multiple charging.
2. Smart LED indicator
3. Automatic charging control: -charge, Constant Charge, and Trickle Charge
4. Built in circuit protections: over charge, over heat, short circuit, to safety.
Plug Type:EU Plug,it applies to Indonesia, , , , and so on Model: DC18WA/DC1851
For - battery charger 14.4V-18V FIT battery Model: Bl1413G BL1813G 1815G
DF347D,HP347D,JV143D,ML187,TD126D,UH420D,UH480D,UH520D,UM165D,UR140D,DMR106
DF457D,HP457D,JV183D,ML187,TD127D,UH422D,UH482D,UH522D,UM167D,UR180D,DMR106
Charging instructions:
1.When the charger plug,light flashes for 2 seconds;
2.When charging, the red light is always on;
3.When fully , the green light is always on;
4.When the battery temperature is too high or overheated, the red light flashes slowly;
5.When the red light is flashing fast, it indicates that the battery is faulty or the battery model is not compatible. (At this time, the battery should be removed in time, replace the battery with good performance or compatible model, and then charge);
Precautions:
1.Charge at 0-40 degrees Celsius.
2.Charge in a dry environment and do not the charger wet.
3.Keep the charger hardware interface clean.
4.When charging, stay from children and avoid getting children out of the power.
5.When charging is complete, remove the battery and disconnect the charger.
6.Always use a compatible battery for charging.
Colour: black
Material: plastic Package Contents:
1 x DC18WA Battery charging base Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.