!!! 3 Pet Dog 100LV Shock e Remote Rechargeable ining E-Collar 300m

[xlmodel]-[photo]-[0000]

This Collar suit for most Dogs,the size for the ring is:20CM-60CM(+)

Mini

20-22

25-30

19

Chihuahua,Yorkshire Temier

Small

20-24

29-36

23

Chihuahua,Yorkshire Temier,poodle,pomeranian

Medium

23-28

35-42

28

Maltese dog,shih T zu

Large

27-31

41-47

31

Miniature Schnauzer,Pekingese

Large

30-34

46-53

35

Schnauzer,English er Spaniel

Large

33-37

52-59

40

Beagle

Huge

43-48

76-84

60

Husky

45-52

88-97

65

Labrador Retrivel

52-62

92-100

70

Golden Retriever,Old English Sheepdog

Common Size of different dogs:Large dog(Body height above 61CM,Weght above 40KG)Medium Dog(Height 40.7-61CM,Weight 11-30KG)Small Dog(Height 25.5-40.7CM,Weight 4-10KG)Mini Dog(Height under 25CM,Weight under 4KG)Features1. Big LCD display.2. 100 levels (optional)/static/e/beep3. The level can be altered by use of up & down on.4. A tone on activates a lone on the Collar Receiver.5. The system can be used up to 3 receivers(expandable 3 dogs).6. The Collar Receiver will turn off if it is unused for 4 minutes.7. Any movement will activate the collar receiver into STANDBY MODE.8. The nsmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minutes.9. Rechargeable the collar receiver and waterproof.How to use the nsmitter1. Install the battery(1*6F22/9V) in the nsmitter-ensure the polarity is correct.2. Pre mode on for 3 seconds and nsmitter wil be TURN ON automatically and it will go into STANDBY MODE of not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.3. Pre Mode on to choice the different mode(sound,ion and static shock) and pre the Up/Down on to set level.4. Choose the different s up to 3 receiver .5. In standby mode,to turn on the nsmitter,hold on at least 5 seconds,will wake it up.Notes:These three modes could be combined freely,so please set those modes you don’t want at the level＂0＂.Always turn on the nsmitter when you change the new every time.Prepare the Collar ReceiverHow to charge the Collar Receiver.1. Connect the charger connector to the charging .2. Plug the charger into a standard outlet.(DC-5V),the red LED light in side the Collar Receiver will be f.3. Charge the Collar Receiver at least 5 hours for the first charge.4. After fully charged,the red LED light will be light.5. When charging is completed,rep the rubber cover.Notes:Low battery indicator:the Collar Receiver will keep beeping for 2 minutes unle it gets charged.Connect the nsmitter with the Collar Receiver.1. Turn on the nsmitter and choose 3 s to encode.2. lift the Reset part of rubber cover in the Collar Receiver.3. To turn on the receiver,with a pen or paper clip ,pre the on/off on，the Collar Receiver will beep-it is now encoded to the nsmitter.4. To turn off the receiver,with a pen or paper clip,pre and hold the on/off on for 3 seconds .the red LED light it turned off.5. After turning on the receiver ,the Receiver is in the working mode and you could encode the nsmitter and the Receiver with in 20 seconds.6. In the working mode,if you want to reencode the Receiver ,simply with a pen or paper clip,pre the on/off on,there is a beep sound to indicate that it is ready to encode.Mistake prevention functionTo prevent your pet from the mistake operation,this system set the working time up to 10 seconds each time.Then you have to repre the operation on again to keep operation.How to cheek the static is working1. Use the test light LED-provided.attach the light to the metal probes-select Static mode-you can see static symbol on the sereen-pre the launch on—the LED light will f on.2. Select a low number on the LCD display-put your fingers on the metal probes and pre the launch on.Notes for use:1. The lifetime of the batteries vary according as how often you use the product.Therefore you should often check the batteries by hearing the beep from the Collar Receiver and watching the indicator sign on the LCD sereen of the nsmitter.2. The valid distance of remote control means the sight-line distance between the nsmitter and the Collar Receiver without obstacles in between.if there are interference signals or signal screening around,the actual remote control distance may vary.3. This product is for pet ining.only by ining,the pet can understand the intention of its owner.good effect can only be achieved after a perod of ining .4. ining seions should be kept positive and short,about 10-15 minutes long each time.5. Presently,this product is the most affective and safest tool for ining pet.following the correct operational instructions,you can effectively in the pet and bring it on harm.Receiver:3.7V 250mah LipFrequence:433MHznsmitter:6F22/9V3 CollarsPackage included:3X Remote nsmitter3X Rechargeable waterproof collar receiver1X9V battery3X Adjustable receiver collar12XMetal contact points,3XTest light tool1XPower plug1XUSB cable1XUse Manual2 Collars Package included:1X Remote nsmitter2X Rechargeable waterproof collar receiver1X9V battery2X Adjustable receiver collar8XMetal contact points,2XTest light tool1XPower plug1XUSB cable1XUse Manual1 COLLARPackage included:

1X Remote nsmitter

1X Rechargeable waterproof collar receiver

1X9V battery

1X Adjustable receiver collar

4XMetal contact points,

1XTest light tool

1XPower plug

1XUSB cable

1XUse Manual

Ex controllerThe same controller with all it stated ablove .Why we give you guys this option?Many customer have above 3 dogs .ex controller will be a greatFitting for you guys and the price is very good .​Package contents:1X Rechargeable waterproof collar receiver