ABS Anti-Skid Switch For Toyota Land Cruiser LC200 LC150 Escape Switch Prado Wheel Anti-Skid Brake System Off-Road Non-Slip

Description

Product name: ABS close switch

Applicable models:For Toyota Land Cruiser LC200,Land Cruiser Prado LC150 3.5/4.0

Function: non-slip

Installation: no ing required

After turning off the ESP, it is normal to display the fault light on the instrument panel. If the ESP is not turned off, the fault light will disappear (no need to turn off the engine and restart the car)

Turn off ESP for snow climbing and skidding, turn off ESP with one on, freely switch the anti-skidding tool.

The prince of turning off the EPS：

This is because the wheel’s adhesion on icy and snowy roads will be very low. When climbing a hill, the wheel will n due to the low adhesion. When the ESP system detects that the wheel is nning, it will apply brakes to the idling wheel. At the same time, the ESP system will also reduce the torque output of the engine. At this time, no matter how you step on the accelerator, the ESP system will always compete with you and e the vehicle stuin p. When your ESP system is turned off, the torque output of the engine will no longer be restricted, and the vehicle wilet enough power.

Function

1. Completely turn off the ESP (Electronic Stability Program) of the vehicle with one on, including

ABS/EBD (anti-lobraking system/electronic brake force distribution), ASC (active Stability Control), ATC (Active ction Control)

2. The switch on is consistent with the appearance specifications of the car equipment.

3. Adopt FF46 type thread, thin-walled, flame-retant and anti-corrosion decoration.

4. The wire harne is covered with flannel tape to avoid noise

Prince

r selects the four-wheel drive system, switch to the middle difference mode, pre the differential lock

After that, the computer automatically turns off the ESP system completely. We take advantage of this feature. After preing the ESP off switch, it automatically sends a spoofing signal to the trip computer to simulate the differential loafter the vehicle has been opened. The computer automatically turns off the ESP system. The differential lolight fes, and the ABS indicator, handbrake indicator, and ESP indicator are always on, indicating that it has been completely turned off.

Features

1. Freely switch during stopping or driving, and turn on or off the ESP switch at any time

Need to stop and power off to reset, it is more suitable for driving on com road conditions, especially on a section of icy, snowy or dy road and a section of paved road.

2 No fault code will be generated, the differential losignal after the trier signal is fully simulated

No., for the vehicle, it belongs to the normal state

3. We compare the advantages of other manufacturers' closing methods of directly disconnecting ABS insurance

The point is: no trouble code, no need to stop and stop the flame to recover, no damage to the vehicle, in extreme cases, the ESP will still start automatically, this is the last layer of protection designed by the manufacturer

If you lose this layer of protection, there will be potential dangers, which is unmatched by insurance.

Precautions

1. To ensure your driving safety, it is forbidden to use this product at high speed.

Yes, especially in corners and rapid lane changes. This system can only be used in non-shop

Turn off this system when you install it on a wet surface or on a slippery surface. Turning off this system can improve the off-road capability of the vehicle. Please choose to turn it on or off by yours. All consequences caused by misoperation shall be borne by the user and has nothing to do with the manufacturer and seller.

2. After turning off the ESP switch, the four-wheel drive indicator lights will alo out during the driving proce of the vehicle.

Off, only the cenl differential lolight is always on. This state is randomly generated and does not affect the car.

If the vehicle is running without a fault code, restart the engine to recover