LED Breathing Light Mouse Mover Undetectable Mouse Jiggler

Use function: 1. Use the Type-C power cord to connect this product to a computer or a charger (charger power: 5V1A). 2. Put the mouse on the product, and align the sensor light at the bottom of the mouse with the moving turntable of the product.
3. The power is turned off by default, the turntable does not turn, and all lights are turned off. 4. Main switch: Press to turn on, the turntable rotates to turn on the light; press again to turn off, the turntable stops rotating and turns off the light.
5. Pause: When the main switch is turned on, short press the turntable to stop rotating, and then press the turntable to restart.
6. Lighting: Short press to switch the RGB light mode, there are many modes to from, such as colorful lights, breathing lights, marquees, etc.; long press to turn off the lights, not to turn off the green timing indicator.
7. Timing: The timing is turned off by default when power on, and the green indicator light is off. Short press to select the timing time. 1 indicator light on means timing 0.5 hours, 2 indicators on means timing 1 hour, 3 indicators on means timing 1.5 hours, 4 indicators on means timing 2 hours, all lights off means timing function light off.

Specifications:
Product name: mouse mover
Color: Black
Product material: ABS+PC
Product size: length 132MM x 122MM x 32MM
Power supply interface: USB-Type-C
Working voltage: 5V
Working current: less than 500mA
Working temperature: 5°C-85°C
Regular working hours: 0.5 hours/1 hour/2 hours/4 hours
Precautions:
1. When using the product, place the mouse on the product, and the sensor light at the bottom of the mouse must be aligned with the rotating dial of the product.
2. This product is only compatible with optical mouse.

Package Contents:
1 x Mouse Jiggler
1 x USB Type-C Cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.