UHU 20ml all-purpose adhesive - 20 ml

Before Use:

• Working conditions: Do not use at temperatures below +5 °C.
• Surface requirements: Materials to be glued must be clean, dry and free of dust and grease.
• Preliminary surface treatment: When glueing plastics or metal, better results can be obtained if the parts to be stuck together are slightly roughened first.

During Use:

• Directions for use: Apply the adhesive thinly to one side of the assembly, press the parts together - that's it! For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together.
• Points of attention: Contains volatile, highly inflammable solvents. Appropriate precautions should therefore be taken during storage or when working with the adhesive.

After Use:

• Stains/residue: Remove wet glue stains immediately. Dried glue residue and glue stains in clothing can be removed with acetone.
• Storage conditions: Store in a dry, cool and frost-free place.