25amps breaker

Begin by deciding the required pole count (1P, 2P, or 3P) and the breaking capacity your circuits demand. In this 25A group you’ll find 1P, 2P, and 3P devices with either 6KA or 10KA short-circuit capacity, plus models that serve leakage protection as RCCB units.

Breaking capacity indicates the maximum fault current the device can interrupt safely; 10KA models handle higher fault currents without nuisance trips, while 6KA variants suit standard residential or light commercial loads. Choosing the right value helps protect both wiring and connected equipment.

MCBs protect against overloads and short circuits, while RCCBs detect leakage currents and trip to prevent shock hazards. In this range you’ll see both options, allowing you to tailor protection to your installation and safety requirements.

Many options come with a one-year warranty and specify mounting and pole arrangements; ensure the device matches your panel’s slot design and conductor setup. Verifying these details helps ensure reliable performance and proper fit.

A C-curve trips slightly later on small surges, which can reduce nuisance trips for equipment with higher startup currents. This characteristic is common in several 25A models and is chosen based on the connected load profile.

Yes, you’ll find 3P variants at 25A with either 6KA or 10KA capacity, suitable for three-phase systems and more complex distribution boards.

Check the number of poles, breaking capacity, and whether you need leakage protection in addition to overcurrent protection. Also confirm compatibility with your panel’s bus bars and the type of mounting. This ensures the device integrates smoothly with your setup.