Prolink patch cord

Start by identifying whether you need Cat6 or Cat6A performance, then pick the length that fits your setup and confirm the wiring standard (T568B). Make sure the cable uses LSZH sheathing for safer indoor use. Since all the listed prolink patch cords are unshielded, they suit most office and home networks; upgrade to Cat6A if you anticipate higher speeds or longer runs in the future.

LSZH stands for Low Smoke Zero Halogen, and it reduces the amount of smoke and toxic gases released if the cable burns. This makes prolink patch cords with LSZH safer for indoor environments like offices, schools, or homes. LSZH versions are available across Cat6 and Cat6A options, so pick them when safety and building codes matter.

For a home office, choose a short prolink patch cord (typically up to 1 meter) in Cat6 with LSZH to connect devices to a router or switch. For a small business IT setup, opt for longer runs (1–10 meters) and consider Cat6A to gain higher bandwidth and future-proofing for 10 Gbps links. Colors can help you keep cables organized as your network grows.

Simply plug the prolink patch cord into the matching RJ45 jacks on your devices and switch. Avoid sharp bends and keep within the recommended bend radius to prevent damage. Route LSZH cables away from heat sources and label the lengths to stay organized.

Cat6A patch cords offer higher bandwidth and better performance for longer runs, making them more future-proof if you plan upgrades to 10 Gbps networks. If your current setup stays within gigabit speeds and you want to save cost, Cat6 is typically sufficient. Choose Cat6A when you need maximum headroom and longer reach with your cables.

Yes, prolink patch cords come in colors such as black, blue, white, and yellow, which you can use to color-code ports or networks. Color-coding helps with quick identification and troubleshooting without affecting performance. Pick colors that fit your workstation and labeling system.