Total hydraulic bottle jack

Start by identifying the load you need to lift and the working height you require. Look for a Total hydraulic bottle jack in the floor-jacks range with capacity that matches your task, from light 4T up to heavy 50T. Check the minimum height for ground clearance and the maximum height for your lift, and consider base stability and saddle size. Finally, pair the jack with compatible safety stands and use on a flat, solid surface for safe lifting.

The ram stroke and lift height are the key details you need to know. Start by checking the maximum height the total hydraulic bottle jack can reach and compare it with your vehicle’s clearance. The hydraulic system and release valve allow controlled lowering, while the ram diameter affects stability under load. Choose a model whose lift range matches your typical tasks to avoid over- or under-sizing.

For occasional tire changes or light maintenance, a smaller total hydraulic bottle jack (in the 4T–12T range) is usually enough. For regular heavy lifting or larger vehicles, a higher-capacity unit (20T–50T) provides the needed margin and durability. Regardless of use, always use proper jack stands and follow safety steps for every lift.

Keep the hydraulic oil clean and within the recommended level, operate on a flat, stable surface, and store the total hydraulic bottle jack in an upright position to protect seals. Inspect seals and the release valve for smooth operation, and grease any moving parts as recommended by Total. Use only compatible accessories such as jack stands, and never exceed the jack’s rated capacity.

Compare the vehicle weight you plan to lift with the jack’s rated capacity, check the minimum and maximum lift height to ensure clearance, and assess the base width for stability. Also confirm that you will be pairing the total hydraulic bottle jack with appropriate safety stands and working in a clean, level space. This helps ensure safe and efficient lifting for your specific tasks.